Search results

Looking to patch a couple holes on my firewall that are commonly found on older firewalls. Shoot me a price and some pictures of what you've got. Looking specifically for where the passenger side diagonal bead meets the bend

A friend is looking to put a manual behind his 317 let me know what you've got Thanks!

http://www.fordbarn.com/forum/member.php?u=909 http://www.jalopyjournal.com/forum/threads/bill-skirving-skirv.972561/#post-10954822 Thank you!

Anyone have new seats that could measure how far it is from the top of the valve to the deck? I'm concerned my valves are to deep and have already had my block at the machine shop for over a year to put in new seats. When I got it back all he did was cut the stems.

Looking for the bracket to mount a coil on my motor. Example below.. Please PM me or email me at mdvette@hotmail.com Thanks!

Just picked up a set of Navarro 8Ba heads that are from the 50s 60s and are in pretty good shape. The water passages have some corrosion, but the gasket surface is a little pitted around a couple passages. Any trips, tricks, things to look for in fixing these up?

It is my understanding that some of the merc pinions were welded to the drive shaft. Does anyone have a picture of this? Did they weld the coupler at both ends? Were the shaft and pinion splined? Trying to figure out if a merc ring and pinion will work for a quick change. Thanks!

Looking for a set of gears. Thanks!

Anyone familiar with these?

my motor came with a cam and i was wondering if i could id it. the lift is at .357 and it has EA and a 8 casted into the shaft. ring any bells?

whats the pros/cons of using the single coil springs that is offered by isky? like ford springs do they bottom out quickly? who makes the best adjustable lifter? thanks fella's

i have both a complete 39 and 40 motor that come with 2 sets nos oversized pistons, over 12 sets of rod bearing that are std .002 .020 and .030 undersized. a nos 41-47 ac fuel pump a box full of new gaskets an assortment of distributor and coils parts and an extra set of rods to make getting...

Complete rolling chassis with good steel. front and rear horns have been bobbed but you get new rears to fix. in one picture you can see that there is a crack in the rail, this is the biggest problem area and should be a very easy fix. crossmembers are in tact and again have good steel. has very...

im looking to finish off my wheel and need the horn button. show me know what youve got and a price and we can go from there. thanks!

Fellas i picked up a 35/36 steering wheel over last weekend at a swap meet and i was curious to which horn buttons would work for that wheel. from doing a search looks like all the way up to 39 might but noway to tell if there is a difference in diameters of the parts. i would like to use the...

for those of you who havent taken a look on ebay there is a very nice toggle for sale at $50.00. it is made by walter trautwine from new york. they are chrome plated solid brass and i guess he has been doin them for a while now. for the most part he prefers to just restore the drop him self but...

Dick had several Fords and was an all around great guy. He will be missed. http://www.fordbarn.com/forum/search.php?searchid=883892

so im about 60% done with my 32 ford pickup and was considering making my frame able to swap out the 39 3 speed to a t5. i have an 8ba infront of a 39 open drive 3 speed attached to a 32 frame using a 41 merc center crossmember. the center structure will be reworked to allow the open drive...

looking for an old welded quickchange. send me some pictures and we can go from there. thanks!

i need the circled areas of a firewall to fix mine. would be interested to hear what youve got.