Search results

I have a 1934 tub type Radio that I want fix. Help

I have c4 transmission bolted to a 59ab. Need to know what is best way for selector linkage. Thank you

Help ford barn, I need the early 40 front stabilizer bar that bolts to the spring perch.

Help fordbarn 59AB factory relived. Very small crack intake valve along the relief. and under the seat. Thank you Dan Schwartz

How to remove and install valve seats?

Help Ford Barn. I have a 59ab that has a crack in number one cylinder below the intake seat. Can it be fixed?

I need a 1940 deluxe grille

Will a 1940 steering box and drag link fit in a !936 ford?

I have a 36 ford coupe with a 8ba flathead I want to change two carburetors to three. Help ford barn Need to move generator so that the three carburetor manifold will fit on the 8ba motor.

Ford barn help, I need a 40 ford muffler for my 40 Ford convertible.

Help ford barn recommend jet size for three Stromberg 97 carburetors running straight linkage. I am running a 3/8 by 3/8 ported and relieved 59 AB flathead.

Help how do I fix a leak in my vintage wire wheel. The black tape has a hole inside over a spoke that is leaking.

1940 coupe 33” section reproduction under trunk Lid panel $30.00 plus shipping

Coil wires green wire to negative and brown wire to ground is this right? Should It be brown wire to negative and green wire to ground I am running a angle drive distributor with a Mallory electric ignition

Completely restored 32 horn with bracket $300.00 plus shipping

I have a restored 40 ford coupe with dim 6 volt head lights. How can I get them brighter?

Wanted 2’X4’ of Waffle Pattern Body Insulation sheeting for the 40 ford trunk tool tray

Help Fordbarn I need 40 ford deluxe rear bumper brackets passenger side.

Angle drive distributor 59 AB flathead do I still time it like the original distributor. Help Fordbarn with my angle distributor. Do I set the timing the same as an original distributor? I am using the angle disturber to save front space. The distributor that I am using is electric Chev. No...

Restorable rear 1940 ford fender has been bead blasted. Needs detail body work.