Search results

I'm trying to gather the rest of the parts to mount my 1934 pickup body to the frame. I'm having a hard time locating body to frame bolts for the cab and bed. Also are there wood blocks under the bed like the cab? do you use the body welting like a model A? thank you

Vehicle in question is a 34 pickup I am building. Does anyone know who makes the cab and bed body mount blocks? Im having a hard time finding them for sale any of the places I have checked. Macs and early ford store of San Dimas. I might try to calling tomorrow. But can't find them online. Thanks

Got a 31 pickup that I can not get running for the life of me. I think it's timing. Buy not sure where I am going wrong. Been over it a dozen times. Most I've gotten is about 10 seconds of running. If anyone in the Seattle area wanted to stop by and help me that would be super awesome. Thanks Matt

I have 2 bb frames. Both 157 inch wheel base. I bought both these for the cabs. The 1932 bb chassis is pretty rough. Pitted and missing the brakes and rearend. No engine or trans. Was a 4 cylinder truck. The 1934 bb chassis is a pretty nice chassis. V8 truck originally Has all the stock brake...

Looking for a nice model A frame for a roadster project. Washington or surrounding states. Thanks! Matt

So I bought a old roadster body and would like to return it to stock. It has been a hot rod at one point, but I prefer stock or lightly modified cars, I believe you guys call them touring cars. I have a 95% stock banger powered model A widebed pickup I daily drive here in Seattle and I just...

Does anyone know someone who can make adustments to the camber on a beam axle around the Seattle Area? I'm thinking big truck shop. But the one I called didn't want to mess with it.

I'm unsure if these are even worth listing, but thought I better try in case anyone needs this stuff. I have a bunch of stock flathead stuff I need to get rid of. 1 matching set of Mercury 8cm heads. the yellow ones. $20 1 passenger side 8cm head $10 1 passenger side 8ba head $10 1...

Im not sure what I am doing wrong. But I can't get my A to run. It's recently been reassembled. I've triple checked the wiring and I believe it to all be correct. It turns over. I have 6.34 volts on both sides of the coil and junction box. I have 6.34 volts on the end of the armored wire...

I have a late 31 model A pickup with a fairly hot "touring" engine. I've hesitated to post here as my vehicle is more of a hot rod, even though it is all 99% model A Ford and not modified at all besides bolt ons. I'm very inexperienced with these engines and I'm getting pretty frustrated, so...

I've tried contacting 2 numbers for Barry Bowyer who I am told makes Winfield carb rebuild kits. And an email for someone I am told makes rebuild kits, but have not heard back. Does anyone know who or where I can purchase one or two of these? I tried to fire up my built Winfield banger It has a...

Just thought I would show you guys what I have been trucking home the last week... Still lots of truck loads left....we aren't even to the good stuff yet... So far I have a complete but rusty tudor with title. About 4 trucks with titles, And a T coupe, and a bunch of parts.... Just wanted you...

I am looking for a round Stewart Warner Model A speedometer core. MUST have good ODOMETER. thanks Matt

I am installing a 1939 transmission with a Clings adapter to my A engine. What throw out bearing collar do I use with this swap? Do I use the A stuff? I know this isn't stock, but is a fairly common mod to otherwise stock A's. So I thought I would ask here. I've already emailed the...

Is there any problem with this? I have a reground B cam and want to put it in my rebuilt A engine. It looks the same except for the fuel pump lobe. This is my first experience opening one of these up and I didn't notice the lobe until I pulled it apart.

I need some shocks for my 1931 Pickup....I've been looking, But I am starting to have some sticker shock. Why are they so expensive and hard to find? I have a hard time spending 15% of what I paid for the truck for some rebuilt shocks. But I don't want to alter the truck either for another...

Which side is in and what is out?

My tank has some rust and I was taking it out for cleaning. all the screws and bolts came out easy. It tips up in the front until the fuel tube hits the hole in the firewall. How do I get it out. I cant seem to get it. I started to read about how to get it out and It seems everyone says to try...

While have my engine out for replacement, I took my steering box out on the pickup, as it has a lot of play and I have heard they are hard to get out with the engine in pickups. I've searched thru the archives and looks like everyone recommends getting the service bulletins to rebuild it, I plan...

The glass on my windshield is loose in the frame. I believe I need Glass Setting material? Is that correct? is there a correct size? also while I am having a new piece of glass cut I should probably replace the windshield and hinge seal. Where is the best place to purchase these? thanks