Search results

Have a good scoop but need the screen material inside. Know a supplier? Thanks all.

35-36 Columbia Parts Wanted: Two-port valve and bracket, speedometer changer, dashboard control lever and arm, Columbia axle housing. All leads appreciated. Respond to ssteers323@gmail.com. Thanks Barners.

240 issues of V8 Times, the Early Ford V8 Club of America's award winning magazine, dating from 1967 to 2011, a 44-year collection, mostly complete. No duplicates, excellent condition, a great source of technical and sourcing information on every year of the flathead Ford. Great reading, a...

Wanted: 1928-48 Speedo gear cap marked 17 for a 17-tooth gear. All leads appreciated. Contact me at <ssteers323@gmail.com> or cell 847 373 1021. Many thanks Barners.

When installing the 8BA rear seal, is the pan gasket left long and compressed between the upper and lower seal retainers and seals, or is it trimmed to meet the retainers? I've read different opinions and would appreciate current thinking. Thanks to all.

On an assembled 39-48 closed drive transmission, on a work bench, if you grab the main drive gear forward of the front retainer, how much up-down movement should there be? I have one with about 3/32" of wiggle at the pilot bearing end and see rocking movement at its aft end at the synchro...

I have a pair of these. Anybody know what year and model they fit? they measure 25" corner to corner on the inside bottom. They came in a lot of 34 stuff a long time ago. Thanks Barners.

On these engines, there is a bracket on the bottom of the ****** clutch cover extending forward under the back of the engine pan that I assume is some kind of pan support. Mine is missing its rubber pad that I believe the rear of the pan sits on. Is that it's function, or is it some kind of...

1934 gurus, what's the correct finish of a 34 roadster trunk lid support arm? Thanks HAMBers. Steve

Rummaging around today I found a Ford box of NOS 78-9541B carb needle valves. I checked my 28-37 Chassis Parts List and it only lists 78-9541....no B shown. The Green Bible was the same. Charlie, Max, Bruce........anyone know what these fit?

Columbia axle housing, fits 36-40. Measures 21 7/8" from flange to flange. Bearing surface measures 2.062", very good original condition except for one small wear spot on outer edge of surface shown in picture. A bit of rib material removed from spring hanger, can be easily added back but usable...

Does anyone have pictures of the 33-34 roadster top tacking strip parts that mount on the lip of the body behind the seat and package tray? This is the piece that you snap the top to. Some guys have said it originally was made of wood, others that it is a "C" shaped metal channel in which you...

33-34 roadster windshield frame needed for project. Stanchions not needed, just the windshield frame. It does not have to be perfect, but must be restorable. Original Ford part preferred. Thanks, Ford Barners.

I know a number of guys who run original Ford starters in their 12 V systems. How about original Ford 6V solenoids? Can they be used with 12 V? And what if the new 12 V system is negative ground?

I need two 34 open car outside door handles for my project. Am looking for gennie Ford handles, stainless-clad, not the solid cast repros. Hope you can help. All leads appreciated. Highboy 34

Hi Ryan, Sorry to trouble you with this. I pm'd J-Graham a week or so ago on a part he was selling and have sent two more messages since. I was the first pm, yet to date, no response whatever. Can you provide a phone number or email address or street address so I can get in touch with him...