Search results

Hi, Would anyone have a good parts drawing to suit a multi plate clutch gearbox? Mainly the input shaft area as mine has a bit to much endfloat( when I depress the clutch I can see the shaft moves slightly forward with the throw out fork movement. I am trying to see if anything is missing from...

Has anyone used a Marvel Schebler carburettor on their Model A motor? I have a Model 10-2929 that was used on a A Model powered race car and trying to work out if there’s a benefit using it opposed to a 94 or 97 carb. Thanks for any input.

Can anyone tell me what the Model 10-2929 is/was used on, its a single barrel carb. I read that the 10-2928 Model was used as a replacement on the 34-40 v8s but cannot find any info on the 2929 Model. Any help would be appreciated, also a cfm rating if known. The one I have(2929) was used on an...

Does the B model distributor/head use the same bolt on the side of the head to keep it held down? I am trying to remove the distributor but there is no bolt in the side hole and it appears to be a blind hole. The Distributor is rusted badly and that may make it hard to remove,but this either has...

I have a Mallory YS701AVC in a Model A and need to get the distributor sorted. The guys who are setting it up have asked for the setup details so they can set the curve up on their machine. Can anybody please tell me what the initial starting degrees and final are and at what rev range they...