Search results

[B][/B]RESORATION SERVICES. Looking for restoer in Twin Cities for a pickup ?Any Sugggestions ? Thanks in advance !

Does anyone have advcie/expertise in installing the light switch for a prewar ford ?

Is anyone familiar with the way to install a light switch at bottom of steering column along with the bail on old Fords?. Sid

i HAVE A 35 FORD WIRING HARNESS FOR HEADLIGHTS i AM- INSTALLING. iT HAS TW0 YELLOW WiRES CONNECTED TO A ONE LOOP TERMINAL. iT IS NOT ON THE WIRING DIAGRAM , i WOULD LIKE To KNOW WHaT THESE WIREs ARE FOR? I am assuming they connect to non battery side of solenoid. Any Thoughts ? Sid

Does anyone make an electrnic ignition set up for a 35 flattie with 6 volt set up ?Comments appreciated.

Looking at installing Bendix Brakes in rear of pickup. I have hydraulic standards 39-41 now and not too carzy about them. What would I need to change to Bendix Lincoln type Brakes ? Also what would cost roughly be for parts? Thanks in Advance !! Sid.

looking for tow dolly foe car/pickupvicinity of mn. Tow up to 5000 lbs. What do you have ? Steve

Nice 33 Pickup/ commercial grille.Email for photos.Steve

Nice 33 Pickup/Commercial.Minor rust out at base.Clean and straight.Pictures available. Steve

Does someone have a diagram -sideview looking into each side of distributor- showing placement of plug wires into cap? I want to be correct fist time, no do overs. I have a persistent miss in motor trying to track down. Tanks in advance!! Steve

Any one have any insight on installing one of these kits on a 33 Ford ? The instructions leave something to be desired , so to speak ?

:rolleyes:I have a 35 Ford that I am looking at replacing the existing spring shackles with kit shackles that connect to tube shocks. Any suggestions on a good way to remove old shackles without a spring spreader ? I am considering lifting each spring side -one at a time with a hydraulic jack...

Have a 33 Ford 6 volt in need of turn signals. Would like to put in a new kit. Any recommendations ? What about putting in a 12 volt kit ? Much appreciated !!:(

For Sale: Clean and tight 35-36 assembly, pass or coml. Part number 48-2455. Also have one off a 1940 Mercury. Steve 612 207-3200

Looking for good 33-34 brake and clutch pedal assembly. 612 207-3200

:cool:Looking for complete clutch, brake assembly, reasonable. Steve

I have a used 6 volt basic turn signal set up for an old car/ truck that mounts on the steering column.I want to mount into a 35 pickup Might anyone have a wiring diagram ?

Drums, backing plates, spindles for conversion to hydraulic brakes. Believe it is 1939 Ford Vintage. Came off a 33 Ford. Good condition.

Might anyone know the cylinder pressure norms for an Intl M Tractor ? Having starting problems and I believe we need new rings. ??

Nice 33 Ford Commercial grill. Straight bars , no dents. Hard to beat this <a href="mailto:one.sseidl@cbburnet.com">one. sseidl@cbburnet.com