Search results

I got a Nova 9 inch clutch plate at a swap meet. Looks new, but does show a little evidence of having been used. Has black 'plastic' looking facings with grooves. Has anyone used these? Says made in U.S.A. Any comments on use. Thanks.

Hello, I bought this part for my 41 pu. Can someone tell me what the short bracket is for ? Also, what is the indentation on the bottom of the panel for?Thanks

Could someone tell me the inside diameter of the tailgate hinge 'rolled tube' at the bottom of the tailgate? i believe the diameter of the tailgate hinge is 3/4 inch and assume this goes direct into the tailgate.My tailgate is so beat up, its hard to tell what its meant to be.Thanks.

Can someone tell me if front and rear bumpers are the same on 40-41 pickups. Also how do the front bumper irons differ from a 39 car. thanks, Gordon.

This thing is giving me some headaches. How tight does the bedsides fit over the frame rails? This one seems to need to be stretched maybe 1/4" to fit over the rails at the 'hump' area. Everything is straight, all original. Rivetting!! Has anyone used bolts and nuts to reassmble the subframe...

Hello, could someone help me with the measurements of the front and rear wooden components of the 40-41 pickup bed.Especially the length of the front piece. It is an American built bed and I bought it in a completely stripped down state, with no wood, and just a pile of rusted, bent, metal. I...

I am fixing up a 41 pick up, and have a pretty rough tailgate. I read in original Ford sales literature that the 'rolled' top of the tailgate is tapered. As mine is badly battered it is hard to determine. Does anyone have a pic or a description of this in original form. This is an American deck...

Can anyone tell me if a 41 pick up has 1 or 2 temp sending units? I recall reading once that they only had 1, but both heads are drilled-tapped for a unit. Thanks, Gordon.

Wanted, Aluminum 21 stud head for 1934-36 V8. Drivers side (L/h), 40-6050-A2, Made in Canada. NOS or excellent used.

Having a tidy up, and came across this unusual right hand side exhaust manifold. It appears to be a typical 37-39, but the outlet is 'angled'. Attached pics with a regular 37-39 for comparison. Anyone know what year this was for? Have also attached for your interest is a manifold for the English...

I am needing a pair of rear main bearing shells...81A 6331 T. These are .030 u/s with .015 o/s thrusts. Thanks,Gordon

Wanted, 37 grille in excellent condition, chromed (or chromable), have some 32 parts to trade. rebuilt original 32 distributor and genuine spark plug lead conduits, DL carb parts, original unbroken rad. cap bezel with patina, w/shield frame, plus other parts. Thanks, Gordon

Do any of you fellows know where I can get a dial plastic for a 38 radio. I am meaning the thin plastic strip, stapled together, with the radio station numbers on it. The one I have is so brittle, it just crumbles. Thanks.

Can someone tell me if a 37 pick-up should have fender welt between the rear fenders and the deck? Thanks in advance.

I am looking for a (preferably) NOS EAB camshaft for a 1953 Ford V8 239 c.I. Would consider an excellent used one. Thanks, Gordon

Does anyone have pics, or info, on the cab mounting wood blocks for a 41 pickup? My 41 wood is 2 pieces with a "finger" joint, joining them together. However, the end at the back of the cab also has a "finger" joint, and I have no idea what this joins to. Does another piece of wood join to this...

I am needing a set of rear shackle bushes for a 1934 ford v8. Would take a set of fronts also. Prefer old original type. Thanks, Gordon

I need to reline the brakes on my 34, and I see that Macs sell an original woven type material. Have any of you guys used this lining? Or can you suggest/recommend some other? Tia.

Can anyone tell me the lengths of the cab mounting bolts on a 41 pickup? there are 8 total...4 each side. Thanks, Gordon

Need a l/h door for a 32-34 pickup. Thanks, Gordon Mackay