Search results

The normal 1931 tire on a 19" rim is a 4.75/15.00-19. Lucas sells a 550-19 that they say will fit on a 19" Model A Rim. Has anyone had any experience with the fit on this tire/rim fit. I'm thinking of going with this tire as I feel it will be a little wider and a little more stable??? Anyone...

Has anyone had experience with the Blockley, LTD, Model A Ford 4.75-19 or 5.00-19 tire??

Wanted: Sparton 12 volt horn Phil (559) 679-1980 Email: lindannphil@sbcglobal.net Visalia, CA

SOLD---------------Used one (1) month almost new Weber Model A Carb For Sale. With linkage kit. You pay shipping. Contact Phil Kneeland, Visalia, CA Cell: (559) 679-1980 Email: lindannphil@sbcglobal.net

Vintage "Polly" Service Station Oil Dispenser $400 obo . You pay the shipping email: lindannphil@sbcglobal.net (559) 679-1980 Visalia, CA

I need the right front door mechanism for a Slant Windshield 1931 160b

I have excessive outer wear on the right front tire of my 1931 Slant Window, 2000 miles. Left front has some wear but not too much. This is the first set of tires that I've had on the car since buying it. The original tires did not have much wear but were older and I replaced them when I bought...

I have found a single interior sun visor which I can't identify. I'm attaching pictures of this sun visor hardware. Does anyone recognize the source of this item? Thanks, Phil

Wanted: 1931 Slant Window Fordor original Sun Visors and mounting hardware. Phil (559) 679-1980 email: lindannphil@sbcglobal.net

Does someone have the trick to reinstalling the glass in the rear door of a slant window? Is there a Slant Window Assoc. like the Victoria Assoc?

I have a lot of slide (about 1/2") in my drive gear on my Main Drive Gear Shaft. This is noticed when the Speedometer Gear and Cap Assy. are removed. I've been told that there should not be that much play (slide) in the Drive Gear for the speedometer. Also told that probably the retainer (ring)...

I need a set of 1931 Cowl Lights

Are all AA engines Diamond Blocks? What is the difference from an A engine and a Diamond block? Thanks, Phil

I pulled my head from a stock 1931 Sport Coupe yesterday (blown head gasket). In trying to be careful I broke the very rear stud off. Is there a way to drill this out or do I end up pulling my engine to do it? Thanks, Phil

Does anyone know where I can find the article "The Zenith Carburetor"?

Wanted to trade: Brand new, still in the box Vintique 28-29 Cowl Lights for a set of new or nice 30-31 Cowl Lights. I need 30-31 and have to trade 28-29 Lights. email: lindannphil@sbcglobal.net Phone: (559)679-1980

I'm trying to remove the Landau bars on my 1931 Sport Coupe. A threaded bolt affair screws into a socket (long hex nut) that is attached to the wood on the inside of the fabric top. Problem; The threaded bolt is rusted into the long hex nut. I've tried "Corrosion X" and it won't budge. I don't...

I'm installing a 12v system (60 amp alt) in my '31 Sport Coupe and have been advised by a competent club member that the stock amp meter will have a tendency not to hold up, that I should replace it with a voltmeter. any thoughts and have any of you experienced that problem? Thanks, Phil

Wanted: Set of rumble grab bars (Roadster top rest bars), nice condition. Also need roll of frame welting, unused. email: lindannphil@sbcglobal.net with pix please. phone: (559)679-1980 Thanks, Phil

I need a spare tire carrier for a 1931 Sport Coupe. The number on the broken one I have is A-1426-B. Thanks