Search results

Sorry for not having the merc ad directions,as a response to a reply I recieved ,apparently Ryan didn't think It was appropriate,and deleted it.read quick before this one gets deleted.:(:confused:

previous post(9-28-19) for offshore dogbone tapers,that spun in shock tapered holes due to be machined slightly undersize and would not hold,to allow tightening of the nuts.I pressed paper against tapered area,to make a pattern of the tapered area.Cut out the pattern,and marked a piece of .002"...

ordered repro dogbones for 47 merc rear shocks.one side went together well,second (driver side)will not tighten,the tapers do not lock together,and theball studs just spin in the matching holes.Think I should add a thin shim in the hole?

1947 merc coupe previously posted with details.info contact hortona4431@outlook.com needs finished,but with extras.price to be determined.

https://www.fordbarn.com/forum/search.php?searchid=10019760

Wondering if merc coupe in swap meet could be detailed by having a self addressed business envelope sent to a post office box.I could return a list of its condition,and possibly a couple of photos,and avoid the sarcasm.Would this violate any privacy,or other issues?

Apologies to anyone who may have tried to respond to the swap meet listing of the 47 merc coupe,by al pa.About the same time the car was listed,I found that Verizon would no longer support my e-mail,because of the age of my operating system.Old e-mail address was ahorton4431@verizon.net .It...

I listed a car in swap meet,and included my e-mail address.I dont know if there was any response,because verizon notified me that e-mail will no longer be supported.Not sure if it's for everybody,or just me.I need to have someone set up another address for me,and will repost.Apologies if this is...

merc coupe,project,scallop paint,flathead,many new parts,needs interior,has details needing completed,large list of pros and cons to interested parties.search listing in swap meet under al pa.posts. ahorton4431@verizon.net

Mike,in response,information was previously posted on the forum,and was taken down,and directed to swap meet.I am recieving responses on the private e-mail.my regular e-mail address is below ad.Thx.for response.

any thoughts on 47 merc ad posted in swap meet 2-20-17 3:50 p.m.?price?description?

Flathead,probably not original engine.front distributor,water outlets in center of heads.car driven into garage,cannot start indoors due to fuel system work,car is on stands,and cannot get outside without dollys to get around corner. Rebuilt-carb,gas tank cleaned and sealed,steering wheel...

I posted info about possible sale of the merc,which was taken down,because it did not conform to bordbarn rules.Without clogging up the swap meet with a large paragraph,I somehow would like to get the information out,and possibly get some realistic pricing ideas.A picture could be provided for a...

Just an inquiry on how to proceed,if I choose to list my 47 merc coupe for sale.My information would take too much space on the swap meet.It needs work,and a description of every point takes two 8 1/2 x 11 tablet sheets.Would it be proper to have a self addressed stamped business size envelope...

I bought both front and rear parking brake cables and they are a couple of inches away from being able to connect.I realize that merc is 4 inches longer than ford,but ford cables SHOULD fit,since mercs extra length is from the firewall forward,but the cable is from firewall,to rear.Anyone have a...

I'm wondering the best way to drain coolant after flushing.My 47 merc only has a tiny drain,and bottom hoses are difficult to reinstall.is there a better way?

just refinished batt.tray,rear stud is riveted to tray,front is missing(j-bolt?),and top hold down bracket.would like description or photo,that I may fabricate something similar. thanks

Took a web cam picture of my MERCURY dash plastic parts,but cannot get it posted yet,there's directions on fordbarn to post,so I will try again.

Didn't get parts in previous picture identified,but used .007"feeler stock on tapered steering shaft,and got about 1/16"clearance between wheel,and cup area under wheel.

removed my steering wheel & repaired cracks,and primed it.Years later,I finally painted it,and tried to reinstall it.I tightened the nut,and started to rotate it,and saw that the bottom of the wheel rubbed the cup area onthe top of the steering column.with the wheel,I had a ribbed plastic...