Search results

I know this may be a little showy for this forum, but figured a few would enjoy seeing a detailed flathead. I just finished this engine up for my 32 5w, nick named "The Old Chrome Coupe" This all started with a chrome 32 wishbone and then I kept finding more old chrome at swapmeets and estate...

Looking for a pair of "Shorty" aftermarket 32 Ford rear bumper brackets, similar to these: Let me know what you have. Thanks, Neal

I just removed these from a very nice early 32 rear end. I've never seen them before, but saw some discussion of them with the Model A guys. Are these carry over Model A parts, or how long did Ford stamp them? Little details like these are part of what interests me in working on old...

Saturday August 27, 2022 at the Paso Robles Event Center (Fairgrounds) This swapmeet is a continuation/replacement of the Early Ford V8 Club swapmeet that used to held in September at the fairgrounds.

I am on the hunt for some more old chrome to finish out the chassis on my 32 5W project. I am building a flathead powered traditional hotrod, aiming for a 1957 era build. I started with a junk body and frame, so I'm not messing up a pristine Early Ford V8 car, but saving pieces from the scrap...

I am on the hunt for some more old chrome to finish out the chassis on my 32 5W project. I am building a flathead powered traditional hotrod, aiming for a 1957 era build. I started with a junk body and frame, so I'm not messing up a pristine Early Ford V8 car, but saving pieces from the scrap...

Looking for a RHD sector shaft or complete Right Hand Drive 37-48 Ford cross steer box. Rebuildable used is acceptable, just not a rusty/pitted shaft. Let me know what you have. Thanks, Neal

Saturday August 28, 2021 at the Paso Robles Event Center (Fairgrounds) This swapmeet is a continuation/replacement of the Early Ford V8 Club swapmeet that used to held in September at the fairgrounds. Thanks, Neal

This Saturday, August 29th, 2020 at the Paso Robles Event Center (Fairgrounds)

I was having a discussion with a friend about 33-34 Steering Wheel orientation. The wheels have double keyways, allowing either Spoke Down (Y) or Spoke Up (Inverted Y). My understanding was passenger wheels were mounted in the Y position to allow full view of the straight ahead instruments...

Looking for original 41-48 Ford bumper bolts for a driver. Can have small dents/scrapes, etc. I need 8 short and 4 long (for bumper guards). Thanks, Neal

Looking for a reversed eye rear main leaf for a 32-34 Ford. I do have several stock main leaves if you would like to trade. Email nhrp@att.net Thanks, Neal

Looking for original tailgate chains, loops, hooks and forged brackets that attach to the stake pocket. All for a 32 pickup, but I think 32-37 are the same. It's for an un-restored truck with "patina", so new parts would look out of place. Thanks, Neal

I've searched, but came up empty handed. Does anyone make the wood for behind the seat and up the inside of the cab for a 32 or 33 pickup? Or at least pictures or patterns? I am working on a fairly original 32 pickup, and it needs a wood kit. Any help would be appreciated. Thanks, Neal

I just painted a set of 16" bent spoke Kelseys for one of my projects. I got to wondering how these wheels were sold as far as paint/color? You see a lot of cream and red original paint wheels out there. Did they come painted from the dealer? I have also seen pinstripes on the rim, on the...

I am trying to repair a headlight bar, so all I really need is the end forgings from the fender to the headlight mount, but dont need the headlight mount. I would consider a complete bar if the price is right. Bar could be bent, but prefer not pitted. Thanks, Neal

I am looking for good 32-48 Ford steering shafts. Worm is not important, just good clean, straight, unpitted shafts with good threads, taper and keyway. I am also interested in 48-56 Ford pickup shafts as well. Again, worm is not important, just good clean, straight, unpitted shafts with...

I just ran across this reground cam. Looks to be a pre-42 core, with the longer distributor drive. Measured lift is .370. Stamping on the end is a 756? Not sure if that is a Ford stamp or something from the cam grinder? Any help ID'ing would be appreciated. Thanks, Neal

I am looking for a Freiman 2x2 32-48 Ford flathead intake with the brass equalizer tubes. Picture borrowed from the interwebs... Let me know if you have one for sale. Thanks, Neal

Looking for a good used (or new) 3.25:1 or 3.54:1 Model A ring and pinion gear set. Thanks, Neal