Search results

Please excuse my ignorance here. I'm well versed in buying parts for my 32 but have just bought a '54 Customline and have no clue where to start with parts. The car currently has chopped front springs and I want to put a set of standard ones in. Where is the best place to buy? Although I am in...

I am in need of a right side(passenger side) rear quarter garnish for a '32 Tudor sedan. A rough one will do fine as long as it is repairable. Although I am in the UK I need the part sent to NJ where it can be shipped to me. I have all of the others so only need this one.

I see that the new reproduction 5 window door latches are saying that they will work on a sedan by modifying the length of the arms to the remote handle. Before I spend my money on a pair can anybody please tell me if this is correct. My originals are really badly worn.

The door window channel guides are missing on my 1932 Tudor, these are the metal U channels which sit vertically not the felts. I see that So Cal Speedshop list the ones that go at the latch end of the door but what do people use at the front end? Is it just metal U channel made to fit? Thank you.

I am in the process of replacing the rotten windshield frame on my sedan. In removing the screws which hold the hinge brackets and slider brackets to the frame I noticed that all 4 pieces are also held to the frame by what looks like a rectangular weld in the centre of each piece. Was this the...

I'm using a repro 4 piece hood on my '32 sedan. What finish do people use on the two hinge rods? Should they be plated/painted or just oiled? Thanks.

In the process of sorting out the bodywork on my sedan and have hit a small problem on the drivers door. If you look at the car side on there are now good door gaps on each door which I achieved by adjusting at the cowl/shims. Although the drivers door now lines up well when viewed side on it...

On a '32 firewall there are a row of holes that I would like to identify if possible. They are 1/4" diameter and six in number. They are on the front face just tucked up under the cowl lip and spaced around the firewall with about 6" between them. If you followed up the line of rivets that...

Does a '32 dash tunnel have any sort of spacer/washer/cushion used between it and the firewall at the six fittings? I have put a new face on to two tunnel legs that came with my car but it sits a little way back from the dashboard face. Sure I got my dimensions correct and firewall is sitting...

I need to lift a section of rear floor in my 32 sedan. I can see the row of rivet heads holding the rear seat frame in place but holding the overlap on the actual floorpan are there small spotwelds either side of the rivets? Thank you.

I need to replace a missing passenger side rear window regulator and window channel on my '32 Tudor sedan. The regulator is a 3 hole mounting and I have been told that it is the same as a Model A unit? Could anybody please confirm that? Does the window channel match anything else as I cant find...