Search results

Not building as many engines as I use to and only need one engine stand. I have used this engine stand sense the late 1970's and have built a lot of engines on it. I have had 4cylinder,straight 6's,SB and BB engines on this and it's a great engine stand.

FREE Come pick them up. I don't want to junk such nice wheels and the local junk yard will not resell them only scrap them. 15" X7" Off a late Model Crown Vick. Would make good roll around wheels for your project car. 4.5" bolt pattern,removed from my 1995 Ranger(the owner had upgraded to 15"...

Edelbrock SP-2P 4barrel intake for a 400Cleveland. Will also fit the 351M as it's a De stroked 400! :D

I have a set of 4 Crown Vic 15" wheels that I took off my Ranger to install the 15" stainless wheels. I'd like to get $10.00 each(must buy all 4) but will take any fair offer. However you must pick them up! I live in DeKalb,Illinois about 70 miles west of Chicago just off I-88.

I have an Edelbrock SP2P 4Barrel intake that needs a good home. I bought it for a project that never came to be. I paid over $100.00 many years ago and would just like to see someone put it to good use. Will fit the 351M(destroked 400) and the 400C engines. I live in DeKalb,Illinois about...

Looking for a good used Offenhouser 6097DP intake manifold for a FORD 2.8 V-6. Drop me a line at johnhartgerink@yahoo.com if you have one. John

I have a SP2P intake for the 351M/400C engine that needs a good home. My friend also has an Edelbrock 600 carburetor for $75.00 that will fit it nice. :)

I have a set of F-100 front brakes I picked up for my street rod project (it been sold too) and then got a set that was completely rebuilt(that's what went with the project). The are complete as pulled from a driving F-100 that switched to Disc brakes. They would need rebuilding but are in good...

Ha Guys and Gals, Got a truck banjo rearend that is apart,but I can't turn the pinion to count the teeth. However the ring gear has 37. What ratio would this be? Thanks John

I have a cetersection for the 1946-'48 Truck banjo rearend,it comes with a set of Bells from a 1942-'48 passenger-car and the differential complete with axles. The Bells will need to be rebuilt. It is a 4:11 gear set . I am asking $150.00 OBO :)

I am cleaning out the Garage and have a 1946-1948 Truck(open) centersection. I also have a set of Car 42-48 bells and a complete diff with axles to go with it. :D

I have used this titanium Fomoco Boss 302 Intake valve for years as a paper weight. I am moving in a few months and selling off my stuff. First $25.00 takes it and yes I will ship it if you pay the shipping. :D Give me a call at 608-217-0397 AS YOU CAN SEE FROM THE PHOTO ATTACHED IT IS IN LIKE...

I have 18 plastic magazine files full of street rodder,hot rod and car craft. These are free to the first one to pick them up. :d

Guys and Gals, A friend of mine knows a lady in Phoenix,Az who has a 1964 Falcon that has been sitting for some time.It is parked in her back yard on a concrete pad. I have not found out if it is a 6 or V-8 yet but do now that the engine is not frozen up. I am looking for someone that would...

Dale was WRONG He needs a 1964.5 through 1970 one piece drive shaft from a 289/302 C-4 trans 8" rearend Mustang. (I am looking for a ONE piece Drive-shaft for my Buddy Dale's 1967 Mustang. It needs to be from a 1967-1968(per Dale--he thinks he knows everything:p)for use with a C-4...

I have a '46-'48 Ford truck center-section that I'd like to use with a set of '48 axle tubes and redo the tubes to take the Ford 9" axles and brakes. Hot Rod Works makes a kit for doing it but was wondering if anyone on here had done it without using the Kit from Hot Rod Works. I can get the...

My plans have changed so I am looking to sell my used Edelbrock Performer RPM Air Gap intake for $150.00 OBO. This intake sells for over $260.00 from Summit new.:D

I am posting this for a friend who has a 1967 mustang street--strip car he is building on a very tight budget. The money he had set a side(over $3,000.00) for this build,his X wife took and gave her son as a loan and the kid has never paid him back one cent!! So every year as he can afford it he...

I am looking for a Ford front-end for my T-Coupe drag car that I am building. I am looking for a '37 to '48 setup. It would be great if the wishbone was removed from the axle to make it easier to move. I do not need the brakes as I'll be running disc brakes as it's going to be a drag car. :D

Ok I do not have much info on Y-blocks. But I do know that Ford had the 239,272,292 & 312 and Lincoln had the 317,341 and 368. Will intakes and exhaust manifolds made for the Ford Y-Blocks fit the Lincoln Y-Blocks? Which of the Lincoln Y-Blocks were Hyd cammed. What parts will interchange...