Search results

  1. Mikeinnj

    What was Henry thinking ?

    I am attempting to install a rear window frame and glass in a 1930 Closed Cab Pick-up truck. I installed the rubber gasket around the window glass and all went fine. No puckered corners. Attempting to install the glass and frame in the cab window opeming has proven quite difficult. I checked...
  2. Mikeinnj

    6 volt starter brish install help

    I am looking for information on how to un-solder and remove the old insulated brushes and install new insulated brushes in a 6 volt Model A starter without burning the new brush insuletion. Are the brushes also crimped to the coil leads ? I have a heavy electric (200 Watt) soldering iron and...
  3. Mikeinnj

    30 Pickup rear window

    Anyone have any tips for installing the rear window glass, frame ,four corner pieces and the gasket, nuts and bolts on a 30-31 pickup truck ? Looks like a challenge ! I appreciate any comments.....Mike
  4. Mikeinnj

    Still aFORDable

    http://www.foxnews.com/auto/2015/11/01/surprise-and-delight-five-affordable-classic-cars.html?utm_source=zergnet.com&utm_medium=referral&utm_campaign=zergnet_1551214
  5. Mikeinnj

    Pick-up bed wood

    I am looking for the dimensions or a sketch for the pick-up bed wood floor on a 1930 Model A NARROW BED pickup if anyone has them. Has anyone made their own and if so what kind of wood did you use ? Thanks , Mike
  6. Mikeinnj

    Ford Model A Right Hand Drive Book

    One new copy of Les Pearson's book " The Model A Ford -Right Hand Drive" The book shows the differences between right and left hand drive Model A's Also shows the difference between USA built andCanadian built export vehicles. Lots of nice clear photos on 42 glossy pages. List price $29.95...
  7. Mikeinnj

    Where are the GAV Wrench's

    Whatever happened to the GAV wrenches that were promised a year and a half ago ??? Has anyone received theirs yet ?
  8. Mikeinnj

    "Bills Bangers" Oil Pump Mods

    Does anyone have info on an article on Model A&B oil pump rebuild and modifications written by "Bills Bangers" a few years back. Cannot access his web page www.billsbangers.com and would appreciate a copy of the article if anyone has it or anything similar. Thanks, Mike
  9. Mikeinnj

    Model T Related

    I know this is not Model A related but it does mention the Model T Ford as being very unsafe and i know quite a few A owners that also own a T. http://www.cheatsheet.com/automobiles/10-cars-that-were-just-too-dangerous-to-drive.html/2/?ref=OB...
  10. Mikeinnj

    Anyone received their GAV Deep Socket

    Have any Fordbarn members received their GAV Deep Sockets yet ???
  11. Mikeinnj

    New Model A Engine

    I have been away from Fordbarn forum for a few months. What happened to Tod's new Model A engine project ?
  12. Mikeinnj

    Reproduction o '30 Radiator Shell

    Has anyone used a 30' Wescott Radiator Shell and how was the quality and fit ?
  13. Mikeinnj

    30 CCPU question

    I have replaced all the wood in my 30' CCPU but have a board that was included (see photo) Can someone tell me whare this goes and how to attach it ? I suspect it goes on the seat riser somehow. A photo would be very helpful. Thanks, Mike
  14. Mikeinnj

    Thank's Brattons !

    I had a problem with the pigtail wire on my distributor. Called Brattons and received a new one in 24 hours..... No charge ! Terrific products and fast, dependable service for over thirty years. Thanks Walt and crew !!!
  15. Mikeinnj

    Model A ???

    With all the snow, this is what the Model A folks in the north east are driving.
  16. Mikeinnj

    More on J C Whitney

    These are from a 1960's J.C. Whitney catalog. Click on pages to enlarge.... How about a reground crankshaft ( no core required ) for $19.00 ? Or a rebuilt short block for $329.95
  17. Mikeinnj

    Interior Insulation

    I am restoring a 30' Closed Cab Pick-up and am considering installing sound deadening / insulation material to the floor pan, doors, cowls, and behind the seat. Has anyone had any experience with this and what material and adhesive did you use, and was it effective in cutting down sound ...
  18. Mikeinnj

    1930 CCPU Gas tank Filler Strip

    Need a Gas Tank filler strip for a September 1930 CCPU. I have a few but they are rusted beyond use and end tabs broken. Must have good un-rusted metal and correct end tabs.(see photo for reference) Contact jburns@aol.com Put "Filler Strips" as the e-mail subject so I don't spam it...
  19. Mikeinnj

    1930 Pick-uo Paint Colors

    I have the paint guide but find the color samples are too small to visualize on an entire car. I have also looked at Marco's color samples. With paint prices being what they are I want to make a good decision on what color to use. What I am looking for is good quality photos of 1930 pickup...
  20. Mikeinnj

    Color Question

    I am painting a '30 truck and know most came with Rock Moss Green but I think that's somewhat drab looking. Can anyone tell me what color this pick-up truck is ? Thanks in advance.
Back
Top