Search results

Looking for one of these 24-stud, cast iron, center water outlet heads to complete a pair. Head has this part no. in the center in large block letters, Ford in script under that, "Made in Canada" under that, and a small "1" under that. Lower round part of combustion chamber should be c...

Looking for a complete German G 28 T Model B engine with insert bearings, not babbit. These engines were built c. 1932-59 and imported into the US for industrial uses like generators, air compressors, and marine applications.

I need one or two 1936-9-style wide five rims that are 15", as used on Marmon-Herrington 4WD pickups. This rim is 5-1/2" wide (conventional measurement, inside the flanges). It has heavy-duty, extra-wide hubcap clips, and almost no space showing between the center and the rim, contrary to a...

I need three 16" snap-ring (many call them split rims) wheels (5 lug) for an early to late 60s (and maybe newer) Ford half-ton, F-100. These were original on 4X4 pickups, I believe, and I think optional on 2WD F-100s. The rim is approx. 6" wide, crude measurement with tire still mounted. I want...

Looking for a set of this trim (pair), which fits around the louvres on the hood sides and is attached with spring clips. If you have a set, I'm your customer.

I need a complete M-H front axle for an F1 Ford, including diff, axles, steering knuckles, hubs, tie rod, etc. I do NOT need the special front springs, as I have them. I have a '49 M-H pickup with everything but this crucial part, and I'd love to put it back to stock. Please advise, even...

Looking for one of these in fair to good shape; don't mind if some plating is gone, as long as it's solid, whole, hinge works, and the thing is still somewhat shiny. I only need one.

I need the piece at the bottom of the grill, below the radiator, with the two crank holes. Fair to good condition, please. I'm pretty sure it's one-year only. Thanks, Rob Stafford

I need two or three of these wheels, which have the hubcap bumps on the inside; standard Ford lug pattern. I need them for a 1949 F1 Marmon-Herrington, but they were used on Ford pickups up through the mid-60s. They need to be in good shape, with the snap rings straight and functional and the...

Looking for this hard-to-find accessory, which bolts into a special passenger-side windshield wiper cover, including a switch. I have the cover, but need the light assembly, including bezel. Happy to buy complete assembly if anyone has one. Thanks for any leads or info.

These are straight at the outer ends; they DO NOT turn down like '36 brackets. Same for passenger and commercial.

I have a '37 Marmon-Herrington half-ton Ford pickup and have three of the correct wheels I need for this truck. I need one or two more, as follows: Ford wide 5 pattern, 15", 5 1/2" inside the flanges, 6 7/8" outside to outside of the flanges. These may have been used on other rigs; I don't...

I just acquired a rebuilt Columbia 2-spd axle that I want to install on my '35 pickup with '39 pedals and hydro brakes. The rear axle unit is complete and I have the firewall valve, but am missing the clutch pedal valve and bracket and dash knob and rod. Sacremento Vintage Ford has...

I need a decent pair of inner fenders, a RH front fender brace, and a '35 pickup spare tire bracket, or at least the triangular lugbolt plate that bolts to the bracket. Thanks, Rob Stafford

I'm looking for a right front fender brace for 1935-7 pickup (or a pair), and a spare tire bracket for '35 pickup. Please let me know what you've got. Thanks, Robert

I need a good, usable pair of front perch bolts for 1935-36 car or half-ton commercial. Please help.