Search results

Is there any way to tell the difference between Edelbrock street heads vs. race heads if the part numbers are gone?

‘32-‘34 Transmission 1932-34 transmission. 18-7005. Inside looks good, turns free. Local pick up only.

What are the differences between a '40 and '41 1/2 ton pickup's?

I have a Ford 8ba that has been bored .040 over and has a Merc. crank. What cubic inch does this come out to? Thank you and sorry for my ignorance.

‘28-29 Phaeton Hello all. I have a ‘27 model t phaeton or touring, looking for something a little bigger. I can’t find any locally to look at but wondering if a ‘28-29 would be noticeably bigger?

I rewired my old harness to accept three prong sealed beam lights. I cut the wire that fed the park lights and made that my ground (grounded to frame). When I use a test light everything seems to work as it should, then when I plug the light bulb in the headlights don't work and my test light...

What are you guys using for paint? I would like my car to look like original paint but finding lacquer and acrylic enamel seems to be difficult around here. I am looking for Andalusite Blue and my local paint stores didn't even have formulas for this. Any ideas would be greatly appreciated.

Anyone have their wheels powder coated black? Wondering if I should go with a 80% or 90% gloss. Trying to look close to factory sheen.

I am going to paint my roadster and looking for paint advice. I bought TCP acrylic lacquer in Andalusite Blue and painted the dash. This was my first time with lacquer and it seems like it wont be very durable. I am now thinking of using acrylic enamel instead, I would like to stay away from...

I am going to paint my roadster and looking for paint advice. I bought TCP acrylic lacquer in Andalusite Blue and painted the dash. This was my first time with lacquer and it seems like it wont be very durable. I am now thinking of using acrylic enamel instead, I would like to stay away from...

Looking for a chrome 2" chopped windshield frame.

I bought a used aftermarket '32 Roadster windshield frame, I then ordered all the mounting hardware. The w/s frame mounting stud is 3/8" on both ends, the threads in my w/s frame are 5/16". Did I get the wrong stud or are the threads in the frame wrong?

I have a 8ba in a model A. The firewall is recessed for clearance, the stock glass bowl fuel pump won't clear the firewall. Did Ford make a 8ba pump with no glass bowl?

Just got my rebuilt 8ba running, stock cam and single carb. How do I set the air adjusting screws on a 8ba (94) carb? Also, what is the best setting for the timing? Thanks.

Hello, I bought a 8ba with a Edmunds regular 2x2 intake manifold. I can't find any info. on this manifold. Anyone know how they perform compared to the more popular intakes (Navarro, Offy, Edelbrock, etc...)? Thanks.

Anyone have a '32 frame handy to measure the center of the radiator mount hole to the center of the first firewall mount hole. Thanks.

I had my engine rebuilt approx. 500 miles ago. I pulled the intake off to change it and noticed the guy that rebuilt my engine used yellow painted valve springs. Some of the paint is flaking off, should I be worried? I would call the re-builder but he has since passed away.

I have a 221 that's been bored to a 258 with a Weber 3/4 cam. Currently I am running a Weiand 2x2 Hi rise manifold with 97's. I was reading the Hot Rod magazine article on intakes and they rate the Edelbrock slingshot very high. Do you think I would notice any performance gains by switching to...

I want to change my crank pulley from a double to a single for crossmember clearance. Is it possible to change out the pulley without screwing up the seal? Any other advise would be appreciated.

I have a strange question. Does anyone know how much of a difference air temperature makes on engine temperature? My car was running hot on a 80 degree day (and a bunch of other days). I rechecked the timing, added two bottles of Redline water wetter, and changed the thermostats to 160's. Today...