Search results

I installed a Float-a-motor this winter and was wondering if anyone has had any problems with running factory gas and vacuum lines ? I'm worried with the extra movement of the engine that the gas and vacuum line mite end up cracking/ brake.

Plan on installing a oil gauge. The fitting that is installed in the block is it the one that hold the dist. in place? And if so my oil pump doesn't have the spring on the bottom of the oil pump that help hold it up.

Is the exhaust manifold heater and the heater door on the fire wall connected or is their suppost to be a gap between them. And if they are connected. with what? Thanks

When tacking down the top and hidem,, How far apart should the tacks be apart? I've done a search and can't find any info on it. Thanks

How far back does the frame welt go? Does it just go under the front fenders? Thanks

I have a 30 CCPU that I am about ready to paint. Does anyone have pic. of how the 2 header strips above the doors are installed. Thanks.

I have a Aug 30 Pickup. Trying to figure out all the locations of the Windlace. I know their was windlace on the front of the doors located in a chanel on the door, And above the door held in by the header strip. Where their any other locations of Windlace? Pic would be nice. Thanks

Is their any adjustment for the 2 tooth steering box. Wheel is tight to shaft, But I have about 3" play before pitman arm moves.

My sons 29 tudors front and rear seats are in poor shape around the bottoms. He doesn't have the money to have the seat redone. $900 to $1300 from 3 different upholster shops around here. Was thinking about having seat covers make for them. Has anyone done this or know of anyone that can make...

31 AA pickup. Cleaned Carb., Cleaned Tank, New gas, New points, Condenser, Cap, Rotor, 6V, Timed, Good spark. Starts good, Compression (cold) #1-59 #2-60 #3-60 #4-63. Checks value lash, All right at 15 thous. When running the engine has a slight noise around the exhaust manifold towards the...