Search results

I have a 1916 Maxwell touring body I would like to trade for a '23-25 or '26-27 roadster or RPU body. This touring is in amazing shape, the wood is super solid and original. Sheetmetal is the best you'll find with only a small spot of rust. This would make a great brass era project. The pics...

These are a NOS Ford set of .020 rod bearings. part # 92A-6211. There for a .020 crank and STD. rods. This set does all 8 rods. $70 includes shipping in the U.S. Thanks!

Im selling a 8ba for a friend, it came out of his '50 coupe for a late drivetrain swap. This motor ran great, didnt smoke or make any noise. It's complete except for the carb. It may be a '52 or '53 because you can tell it was blue and was painted gold at one time for the '50. Even the generator...

I've got a rebuilt, ready to run 1935 Harley VLD 74" flathead engine. It's totally rebuilt, .020 pistons, all new shafts, bearings, cages and races. Correct VLD high compression heads, M51 UL carb, generator and new ignition. Belly #'s match and VIN is original, never messed with. I don't have a...

turtle deck quarters and the lower inner brace. The deck sides are in good shape, very little rust through at the bottoms, and the brace is straight, just needs cleaned up and painted. Dont want to ship these, prefer local pickup. $200 for the sides and $30 for the brace. Thanks.

I am selling some parts for a 1925 coupe. All the fenders, spare tire rack, side aprons, trunk lid and a wheel that was on the spare rack. The fenders have some old weld repairs, and one of the rears has some rust out. They are very restorable, and the rust through on the one is on the bottom...

Selling my modified roadster, this is a new build. Body is based on a 28-29 cowl, the rest is hand built. Driveline is from a '31 roadster and runs great. The frame is custom built 2x3 with a model A rear crossmember and a '32 front crossmember, superbell I beam axle with A spindles and a posies...

This is a Tropic Aire water neck for a A. it has the heater valve in it but the valve will need to be repaired, or replaced. Very solid no bad corrosion inside, good neck. if your running a heater in your A this is the neck you need. $25 plus $10 shipping. Thanks.

I have a cast Iron Winfield head for sale. It has a K7 stamped in it which I believe makes it a 7.1 compression head. It's been magnafluxed and has no cracks. it needs to be surfaced and the chambers cleaned up, no corrosion around the water passages. It will be a good runner. $300 plus $45...

This is a Townsend 4 dipper T pan. Its in great shape, needs bead blasted. $50 plus $15 shipping. Thanks.

This is a never used Frontenac deep sump finned aluminum oil pan for a T. The bolt holes were never drilled, it needs to be bead blasted, its just been in storage forever. $75 plus $15 shipping. Thanks.

This is a Iandola high compression head for a T. It is a unfinished blank. The chambers and water jackets dont need anything, but the head bolt holes need to be drilled and the spark plug holes need to be tapped, and could use a bead blasting from sitting around forever. $200 plus $25 shipping...

Looking for a good A motor, something that ran recently or is known as good. Doesnt need to have manifolds, Thanks in advance, Rob.

This is my '27 rpu and looking to sell it or maybe a trade plus cash for a 23-25 T roadster. It's a brand new build, custom built frame, real henry steel '27 body. Custom built bed in the style of the old aftermarket beds from the 20's&30's. '49 Flathead, all new with a Isky cam, adj. lifters...

Navarro 8ba style intake, brand new, never run. It has a small chip on the generator bracket guide, you can see it in the picture. It wont affect anything and you dont see it when the gen bracket is on it. $300+$25 shipping, U.S. only. Thanks!

I have a pre-48 Sharp 3 deuce intake for sale, it is brand new, never been run. It was used for mock up once and put away. It needs a little cleaning from sitting but it's ready to bolt on. $175+ $25 shipping in the U.S.. Thanks.

Modified flathead powered roadster, body is based on a '28 cowl, the rest custom built. 8ba flathead, isky cam & springs, all the best stuff. '36 rear W/ open drive conversion, '46 open drive trans, 2x3 frame, '46 brakes. everything was rebuilt when built 3 years ago and has about 5000 miles on...