Search results

Hello 'Barners, I am in the process of replacing my intake manifold (stock 8BA) on my '50. I am thinking about replacing the stock 6V generator with a Powermaster 6V positive ground alternator. Is this a pretty straight-forward installation? What do you do with the 3 wires that are attached...

I am listing this nice 1951 Ford Custom Convertible for a friend and longtime member of the Early Ford V8 Club of America. It has the 3-speed manual transmission with overdrive. Engine was rebuilt using H&H rolling crank, rods, pistons etc. Converted to 12 volt with electronic ignition. The...

Folks, I have a friend in need of an exterior visor for his '47 Ford COE. Most can be adjusted in the center somewhat. If you have one, please let me know or call him directly at 937-302-8554. Ask for Jim. Thanks, Pat

Hi All, My son-in-law has a problem with his 1947 Ford speedometer. The needle is "stuck" on about 50 MPH. He recently replaced the cable with a new one that he purchased from Michael at Third Gen and while taking it for a test run he heard a loud screeching noise from the dash and noticed...

A friend sent this picture of a license plate he saw on a '32 Ford. Anybody have any extras? Pat

Sale Pending I am listing this with mixed feelings....need the room! I have owned this Standard Coupe for about 15 years. I have attended many Early Ford National Meets entering in the Touring Class where it was awarded a 1st Place each time. It is Washington Blue with Black fenders. The...

Parts still available after Hershey Trip (Mostly 32 Stuff) These parts are still available after my Hershey trip: (All prices plus shipping) 1. 1932 Ford V8 distributor ($500) Sale Pending 2. 1932 Ford V8 rotor ($50) Sale Pending 3. 1932 Ford V8 condenser - SOLD 4. 1932 Ford V8 exhaust...

I am listing this real nice 1948 Ford Super Deluxe Fordor for a fellow club member who has health issues. About the car: The car has been driven about 62,300 miles. It has a Manual Transmission, and is a 6 Cylinder with a Columbia two speed Overdrive. The exterior is a deep maroon, and the...

sold!!!

Found one! Thanks!

The "Cars & Parts" Swap Meet originally scheduled for this past spring in Springfield, OH is now a "GO" for this next weekend! :eek: See this link for info: http://www.ohioswapmeet.com/ Have Fun & Stay Safe! :) Pat

The Springfield, OH swap meet originally scheduled for this past May is now going to happen this weekend! :) Here is the link to their website: http://www.ohioswapmeet.com/ Have Fun & Stay Safe! Pat

Hello, Wanted to let you know that a friend of mine is auctioning his 1929 Ford Model A Tudor on December 12th. He has owned it for 50 years or so. Would be a great car to restore or beginner car for someone. His auction will be held in Lees Creek, OH...about 8 miles from Wilmington, OH. He...

Hello All, The last time I posted I mentioned that when I took possession of my 1930 Town Sedan, the brake switch was located on the outside of the driver's side frame rail. Knowing that it was in the wrong location I removed it and purchased a reproduction brake switch to move to the correct...

Hello 'Barners, I am new to this side of the Fordbarn. I have been a member of the V8 Forum for many years...way back to when Shelly owned it! Shelly is in our local regional V8 Club group...great folks Mac & Shelly! Anyway, I took delivery of a 1930 Ford Model A Town Sedan (Briggs) this...

1932 Ford Deluxe Roadster - SOLD!! This car is no longer available!! I am selling this 1932 Ford Deluxe Roadster for a widow in our regional group. It is an early roadster...has the single hood latch pulls and doors. It was a "B" restored as a V8 many years ago. Hasn't been driven much...

Hello All... I had a problem with my 1950 Ford (original V-8) not running smoothly. I was experiencing a loss of power under acceleration when going through the gears. I replaced the distributor cap & rotor first (the old one had the "button" under the coil post missing!). It ran a little...

Hi Barners, I drove my 50 Ford Tudor from Ohio to Florida this week and noticed a lot of bottoming out through the mountains. Thought I should replace the front shocks. I looked online for listings and found that the front shocks at Dennis Carpenter, C&G, & Shoebox-Central (part #8A-18124)...

Reminder 'Barners.... December 31st is the deadline for the early registration discount if you are planning on attending the EFV-8 Club's Central National Meet in Auburn next summer. Should be a great time! The Foundation Museum will be all "dressed up" with it's new Rotunda re-creation...

Need 9" Ford 3rd member, prefer 3:55 ratio posi for 28 spline axles. Will consider other ratios as well. What do you have? Thanks!