Search results

I would appreciate any help in identifying this Trico windshield motor. I'm fairly sure it is for a Ford 1930's area. Thanks in advance. Mark

This blue cast Dearborn badge # 821 was in a box of badges I acquired some time ago. I'm familiar with the Ford Rouge badges this one I've never seen. The cast in date on the back I'm wondering about among other things. Does anyone in the Ford Barn know if this is real or fake? Thanks, Mark

1950's Mallory Magspark 6V. Transformer #MS 6 VP Transformer has been stored inside for years. No cracks or chips. Not tested. Sold as is due to age. Shipping to the 50 United States via USPS Flat Rate Box for $12.35. Please contact seller if you have questions.

1937- 1938 85 HP V-8 Radiator will also fit 1939 Standard. Sold Was removed from a California car as a spare. Please review photo back and front look the same no major fin damage. $145.00 Prefer local pickup, radiator is heavy! Sacramento area Northern California. Call or email seller...

This is a 1953 Mercury V-8 (EA) Stock Camshaft removed from a low milage California Engine in the early 90's for a rebuild. It was replace with a mild grind camshaft during the reassembly. It has been in California dry storage ever since. Please review photos, pencil is pointing to fuel...

My last camshaft question: This is the last one I found it the rafters. An Almquist 500 R in good condition. All lobes look good not flattened out (see photos). I googled (Almquist 500 R) no help. Before I go to the HAMB I'm wondering if any of the flathead Ford V-8 engine builders here know...

This is a used 1953 Mercury camshaft out of a low milage engine that was replace with a mild regrind. It has been in dry California storage since 1985. It is factory marked EA. Asking $60.00 plus shipping. Shipping will be via USPS $27.00 economy, $35.00 Priority to the continental 48 states...

It had been a long time since I've had a Flathead V-8 engine apart, is this camshaft for a 1940 to 1948 Ford? I know it is for a Ford V-8. It is stamped Iskenderian 1007 on the end. As I remember it is a Track Grind. Thanks for your help. Mark

I removed this 1953 Mercury camshft from a low milage Mercury Flathead engine some time ago that I was rebuilding. it was replaced with a mlld regrind. It has been in dry attic storage eversince. My question is befrore I list it in the Swap Meet is it correct for a 1953 Murcury being an EA...

1931 original Ford Firewall, original paint. No extra holes that I can see. Please review photos. (SOLD) plus shipping from Northern California. (or free pickup) Mark Slight markslight@wavecable.com

1931 sedan Firewall from a Californial Car. Original paint no extra holes that I can see. Asking $175.00 plus shipping from Northern California. Free pickup. Can email photo. (see newer ad for photos) Thank you, Mark Slight Sr. Member markslight@wavecable.com

(8) 11T 6505 V-8 USA made New Intake/Exhaust valves. Use with split valve guides. Passanger 1932-1948, 90 & 100hp. Commercial,Truck 1932-1947, 90 & 100hp. Made by Toledo Steel, Toledo, Ohio. All are new unused condition. Current National vendor price $12.50 each. Application; pg. 268 of...

NOS Ford Script Pistons W/Pins 01T 6108-D in Original Box. Application; referance page 240 of the Ford Parts and Acessories Catalouge. .030 OS Aluminum 4 ring Domed Pistons w/pins 3 1/16" 1935-1942 90hp. (see photos) Shipping vis USPS Standard shipping to 48 US states $24.00. Overage will...

16 N.O.S. 11T6505-A Ford Script Intake/Exhaust Valves. (SOLD) Application; Passanger 90 & 100hp 8cyl. 1932-1948. Commercial & Truck 90 & 100hp 8cyl. 1932-1947. Referance page 268 of the Ford Chassis Parts & Acessories Catalogue. (Green Bible) 1.5" dia. X 4.76 long. New in original boxs...

8, V-8 N.O.S. Ford Script Pistons w/pins in Original Ford Box. Referance page 240 of the Ford Parts and Accessories Catalogue, "Geeen Bible" .030 OS Aluminum 4 ring Dome Pistons w/pins 3 1/16" 1935-1942 90hp. (see photos) Shipping to the 48 lower United states $27.00 standard USPS...

1935 Ford 3 speed tranmission shift lever 7209 (Swan Neck). Fits tilt back shift towers 32-35 I was told. (Sold thank you.) Please review photos, measures 4 1/8" from the top of the pivot ball to the end. Some pitina on the chrome of the lever. Threads for the shifter ball are good. Page...

(NEW LISTING 2-15-2013) 2 Used 48-6044 StayRods 1935-41 Passanger & Comm. (Anti-Chatter) 60 & 90 hp. 8 cylinder. Referance Ford Chassis Parts and Acessories Catalouge, "GreenBible" 12 13/16" from center of eye to flange. Still have some original black paint on them. Shipping will be...

I have a Swan Neck shift lever that looks bent or very worn at the end that fits into the shift tower. I would like some help from a transmission literate Barner to review the photos and tell us if it is serviceable. The application dates I got from the Vanpeltsales.com site. Thanks, Mark

More information on the Ford Radius Rods also know as (engine steady rods & anti-chatter rods). In the "Green Bible" page 226 is the infomation on part numbers and applications. However it does not give length deminsions. The ones I have have an overall length of 15 1/8". I have found out...

Does anyone know the correct part number for the V-8 Ford Motor Stay Rods (anti-chatter rods), and the application years I can't find them in the "Green Bible". My Motor Stay rods are 15 1/8" Long. photo attached Thanks Mark