Search results

SOLD I did a halogen conversion on my A. Here are the parts I removed from the reflector. One bulb broke. Nice parts. $35 shipped

Headlight harness and switch body removed from a car with an old restoration. Not sure if the switch body is gennie or not. Good harness. The cowl light wires were snipped. Not sure what the extra red wire taped to it is for. Easily removed. $45 shipped

moved

28 Headlight rings. one little ding. Plating is wearing off. 1/2" crack on the edge of one. $20 Trico vacuum fan. spins slow. $60 Engine pans. Repo I think, but a little banged up. $15 Plus shipping on all parts. PM me

Ive got a three speed side shift open drive ****** from a 51 F-1 with an 8BA. I wanted to turn it into a closed drive ****** to put in a 46 Ford car. I gutted the F-1 ****** and put all the guts from a 39 Ford ****** into it. Cluster/mainshaft/reverse/early style 2.75" syncro. Everything fit...

Nice pair of 34 Ford pedals removed from a restored car. No rust or damage. $150 + the ride

Cool set of 32 WI plates. $50 shipped.

Model A SW speedo. Nice numbers and trim. One tab will need a little repair work. $60 + the ride.

These reproduction gutters are 20ga. cold rolled steel. Some instructions are included that will help you remove your old banged up gutters, and weld these on. All you need to do it trim, angle cut the front to fit, and weld on. Driver side pictured. Sold in pairs. Shipped in a cardboard tube...

delete

Looking for a straight 32-36 Ford front axle that has been dropped. Let me know if you have one and how much. Thanks, Rob

Ive got a 36 Ford ****** I was gonna use in an AV8 but didnt. Need some tax money. This was taken apart and cleaned up. New rear bearing, and new front seal in later model front bearing retainer. "48" case Has 1940 rear reatainer. also comes with tab type clutch shaft and fork. Gears are all...

Ive got a 35-36 Ford V-8 ****** I had built for a project that never went anywhere. This ****** was took apart, cleaned, hot tanked, and re assembled with good used parts. New rear bearing, and new style front seal on front bearing retainer. It is bare metal, and clean. "48" case 1940...

Might be a long shot, but I got these hinges with a bunch of other stuff from a guys collection. All he had was 33-34 Ford coupes, so I assume that is what these are from. Could be wrong, I am alot, look at the pics and see if you can ID anything. Wish I knew of a local car I could compare them...

34 truck HL bar $45 + shipping

Ive got a set of Old Offy finned V8-60 heads with the water tubes. Very nice. Two chipped fins, and no corrosion around the water jacket ports. Someone started removing a little material to clearance valves. Minor, and no damage was done. $650 shipped insured in the lower 48

I have an Av8 roadster with a 51 Merc engine, and a 39 trans. The flywheel is from a 49 Truck, and it has a 10" clutch, and flywheel. Can I order a 9" clutch and Pressure plate and have it bolt up to this flywheel, or am I limited to the 10" Pressure plate. Id measure it up, but its together...

Model A seat adjuster frame work. Moves free. $45 + shipping

32 Dash insert $50 + shipping

32 Model B radiator. Looks good and should be ready to run. No cap. 240.00 Shipped in the lower 48