Search results

I lost my download for the techno source for 32 to 53 ford flathead. Does any have one that i can download. Thanks

Found the serial number. It was way up front on top of front crossmember. It was right next to the two rivets along the very edge of the frame rail. Thanks to all for help.

Looking for serial # location. Was told it was on frame next to steering box. I cleaned the frame about 8" and no sign of numbers. Is there another place to look for numbers? Thanks in advance.

In need of a primary metering block for a Holley 4bbl carb. The Holley is a 390 cfm, list number 8007. The part number for the metering block is 7204 that is stamped on the top of the metering block. Thanks, Richard

When installing the switch through the firewall and under the gas pedal do you cut the carpet or not? Is there a dimension between the switch and the pedal?

Looking for Holley 390 cfm carb. Part #8007. One that can be rebuilt. Thanks

What is the position of the bottom window channel on the window glass ? How do you adjust the window when installing? Thanks

When you bolt the universal joint to the output shaft on a closed drive transmission is there play on the shaft. I have about a 1/4" play with the bolt tightened. Thamks

What is the correct way to install the kickdown switch under the gas pedal? Does it just touch the pedal or do you leave a determined distance between pedal and switch? Thanks, Richard

Looking for a rearend for 1950 passenger car. It has the removable carrier.Has 3:74 gear ratio but could use 3:54 if available. Thanks

I have seen where vinigar is used to clean radiators. What is the ratio to water and do you have to neutralize after? Thanks

What is the proper procedure on installing copper head gaskets? I have read previous posts saying to spray and some say just put on dry. If you do spray, what do you use? Thanks

Installing a saganaw box on a 40 Ford. I don't see anywhere how to check lube fill. What am i missing? TY