Search results

Might be a long shot but I am trying to come up with a part number for the AER inserted rod bolts. Looks like an ARP bolt but haven’t been able to match it up. Rods are about 12 years old back when Rich was in Skokie. Can’t seem to get a hold of the new guys in Indiana. Just thought I would...

Scat crankshaft shows stroke length 4.00 and 4.250. I thought the stock stroke was 4.125. Which is a stock replacement crank? Thanks for the help.

Had a short block built by AER many years ago when he was in Chicago. I have changed the front rope seal 8 times two different oil pans, two different pulleys now just put a modern seal in and it leaks too. Curious what people have seen for runout on the front of crank or pulley surface. At...

I have Antique Engine Rebuilding inserted connecting rods and was curious if anyone has experience with those as far as knowing the torque for the rod cap bolts. They use a special bolt that looks like some type of specialized ARP bolt. Rich has sold the company to group in Indiana and I was...

Have a new oil pan gasket set and it comes with two different seals for the rear main cap. One has to be squeezed in to work the other will fit but not as tight. Which should be used. I noticed the one I took off was the bigger one and the rear of the pan had cut into it pretty deep, thinking...

My oval speedometer will sometimes bind up when going in reverse. Snapped my drive cable. It seems to work just fine going forward and seems to indicate speed good but when I go in reverse it will lockup sometimes. Curious if anyone who has been inside one of these would have any input...

I would really appreciate some assistance with a steering question. I am building a 28 roadster that is not totally stock but my frame is stock and I am using a two tooth steering box. I have a 33 Ford front axle with 37 (round) spindles with 40 Ford brakes. Anyway way my question is, does a...

I would love a little assistance if someone has some time. I have a 28 roadster that has one of those gas tank eliminator cowl panels and a upper firewall with a bead rolled panel. What I am looking for is the distance between centers of the radiator support rod mounts on the upper firewall...

Looking for a nice dual downdraft intake manifold for stromberg carbs. Interested in either original or aftermarket in good shape. Not really interested in broken or repaired units. Appreciate any replies or leads. Thank You

Trying to find a high compression head. Been trying to get a 6.0 snyder head for almost a year now. At this point I'm not sure those are ever going to happen. Looking for repop or original type head. At least 6.0. Thank you.

Could someone help me with a little information about the Oshkosh gathering. I live and work just a few minutes north of Oshkosh and was planning to take a couple days off work to go out and enjoy all the wonderful cars. Since I am not a member of MARC, is this an event I can even get into and...

I was curious about how others feel about the way the swap section is setup. On the old board the "for sale" and "wanted" listing were all in one section. Now it seems very few members ever look at the "wanted" section whereas before everyone that looked at the swap section saw all the...

Curious if any fellow model A'ers have ever tried Redline Shockproof Heavy as a gearbox lube. I have used it in my Harley and it made a huge difference in smoothness of shifting. They rate its film strengh as 75w250. Just curious if anyone has tried it before and what your results were...

Need a little help finding a source for some 6 volt automotive type relays. Something similar to the bosch type relays. If anyone has purchased any lately I would really appreciate info on where you got them. Thank You. Appreciate any leads.

I have a technical question concerning the oil pump/distributor drive gear. I am assembling a model "A" engine with an old original Riley Two Port head and using an old Harmon & Collins Riley grind cam. I spent a morning with Bill Stipe and we mapped the numbers for the cam and it seems it...

A quick question for those that have run a model B cam in their model A engine. On the B cam the forward cam bearing surface has a spiral groove cut in it that stops just short of the end of the bearing surface and the A cam forward bearing surface has a spiral groove that is cut all the way...

Quick question about Snyders "Antique Ford Country" green engine enamel. I just received two pints of this paint that I was planning to shoot with my spray gun. the question I have is this paint already reduced and ready to spray, should it still be reduced or was it designed for brush...