Search results

anybody out there that rebuilds flathead transmissions, preferably in north Texas

I want to replace the engine driven fan on my 41 with a shroud and electric fan. I can buy an 18" fan and make a shroud but with all the complete units out there for modern cars does anyone have a suggestion on what will fit

I converted my 41 to 12V and it's using a crab distributor. I just put in a Bosch blue #00012 coil, but what condenser should I use to match the coil?

Can anyone tell me what is the either the correct color or something real close to correct for the "Ford" logo on the bumpers and hub caps of a 1941 Super Deluxe

I am planning a long trip with my 41 coupe and want replace my 600-16 tires with 15" tires. Car is all original with drum brakes and I want wheels that somewhat maintain the look of original and my 41 hub caps fit onto. Vintiques, US Wheel and Wheel Smith all make steel wheels with 5-1/2 bolt...

I have two 1941 radios: a Philco and a Zenith. Both are complete and appear to be in about the same condition. I am assuming that they do not work. Before I have one of them restored for my car which brand is the better radio to start with? It would be nice to know if one has an advantage over...

Cleaning out the garage and have the following NEW parts: Spotlights with "Ford" script, NEW, Chrome, 6V $180 for pair (2 ea) Low/Reverse gear #1A-7100A $60 Timing gear 18A6256 - $60 for 2 ea 39-40 pass/39-47 P/U cowl vent screen $30 1940 Front fender brace panel, pair (2 ea) Crankshaft...

Have five sets (one large and two small bearings) of crank bearings NOS in original boxes (some are Ford boxes) in sizes .010 and .030. One set of each for $100 per set' Also have small bearings, one size .010 and one size .020 and one large bearing size .020 for $30 each or $500 for everything.

pair (2ea) of NEW Headlight Buckets P/N 01A13026 that fit a 1940 Passenger or 40-41Pick Up. Includes the Bucket to Fender cork gaskets but are missing the headlight retaining ring and adjusting hardware.

pair (2ea) of NEW Front Fender Brace/Splash Shields P/N 91A-16088 that fit a 1940 Passenger or 40-41Pick Up

When I try to respond (new post) in a for sale ad I get a message that I am not allowed to post be cause I may have been suspended?

6V alternator comes with parts and instructions to change your car to negative ground. Has the wide fan belt pulley. I bought it for $265 and have only used it on a test stand for about 20 minutes when I fired my engine for the 1st time. $150 plus shipping email me at hemi.rodder@sbcglobal.net

I need the 2 pieces of stainless trim that fits on the cowl of a 41 Super Deluxe

Just pulled the drums off and they are .125 oversize WOW! Time for new ones. Has anyone used the drums that Speedway sells. They say that they are "Bendix brake style" but doesn't the original Lockheed brake and the Bendix brakes use the same drums? I know the Bendix shoes are 2" and the...

6V alternator: I bought this from Fifth Avenue Antique Auto Parts for my 1941 Ford. It is a 60 amp, 7.5 volt with an internal regulator and the DA plug to hook it up. I have all the instructions and it was only used for less than 100 miles. It works great but I had some wiring issues so I...