Has anyone used the FiTech 97 fuel injection?

R

RobWi

Member
Considering utilizing the FiTech 97 FI system, does anyone have any experience with the set up? Initial plan is to put it on a Mercury 4 1/8 X 3.267(+0.80), 1.72 intakes and 1.6 exhaust, .360 lift intake/.370 lift exhaust, 250 intake duration/260 exhaust duration, with LSA of 110. Targeting 8.5 to 1 compression.
 

Attachments

  • FiTech 97 FI for Ford Flathead.JPG
    FiTech 97 FI for Ford Flathead.JPG
    45.8 KB · Views: 9
RobWi said:
Considering utilizing the FiTech 97 FI system, does anyone have any experience with the set up? Initial plan is to put it on a Mercury 4 1/8 X 3.267(+0.80), 1.72 intakes and 1.6 exhaust, .360 lift intake/.370 lift exhaust, 250 intake duration/260 exhaust duration, with LSA of 110. Targeting 8.5 to 1 compression.
Click to expand...
1793292675588.png
 
I will be watching this setup closely. Very interested in talking with someone running it, I realize it's a pretty new product, just getting the installation sheets would be interesting.
 
Im watching this thread too.

By the way, I did run into someone who had Autotrend’s EFI “Stromberg look alike” product on their 32 ford recently. It was at 2024 Goodguys show in Raleigh. They were super impressed with tech support and said flathead ran excellent with fuel injection.
 

Attachments

  • IMG_2153.jpeg
    IMG_2153.jpeg
    1.4 MB · Views: 15
drfromnc said:
Im watching this thread too.

By the way, I did run into someone who had Autotrend’s EFI “Stromberg look alike” product on their 32 ford recently. It was at 2024 Goodguys show in Raleigh. They were super impressed with tech support and said flathead ran excellent with fuel injection.
Click to expand...
That actually looks better than I expected
 
You must log in or register to reply here.
Back
Top