Recent content by ULLRICH

Complete set of original Ford NOS rings in an unopened box for Aluminum pistons. Call John Ullrich 815 403 3803

Disc and pressure plate from a previous project unused John Ullrich $175 plus the ride 815 403 3803

BTT price reduction...how's $60.00 plus the ride

Just checked it out, thanks, don't know why I could not find that before when I was looking on Ebay

Looking for a supplier of headers for a V8 60. The usual suspects.....summit, speedway etc. don't have anything. Building the set to fit my 37 sprint car is OK, but I wonder if there are any blanks for the ports pre made?

Need a set of .60 over piston rings Thanks Ford Barn John 815 403 3803

Nice Pair, No rust, original wire looms for a V8 60 HP May be NOS Call John 815 403 3803

Thanks all for chiming in, I have been using the stock helmet from the 60 on the 60hp, was curious if I was going to get more out of an 85 on my 37 sprint racer. Bubba I switched over to an external 12 volt coil and condenser ( Napa 176 )unit per your recommendation and ran last year at Road...

Will the helmet style aluminum case from a 85 hp fit the v8 60?

I will quadruple the recommendation for flat jack, v8 60 for my sprint car.

btt

Complete set front and rear left and right original Ford lever style shocks, believe to be NOS has a Ford tag wired to one. Good lever pressure holding oil, should be ready to go. John 815 403 3803

btt

Nice original Ford Aluminum Heads, 17 bolt V8 60 37-40, seem flat with a straight edge, but probably should be decked. John 815 403 3803

I went to advanced auto and looked at the hoses that were in stock and found a 90 degree that "worked" for my sprint car with a V8 60. It had to be cut to length, but I was not concerned about originality as the application was done to strictly be functional.