Recent content by u10166

For anyone still interested in changing the pinion pilot bearing it will come out the torque tube side with out removing the retainer and rivets. It took big heat not cherry red but (Oxy and Accetylene hot) and a heavy slide hammer to get it out.

Hi everyone, I have two flathead v8 engines that need all of the machine work done to them. Pulled one head each found no cracks but each block needs sleeved. I can't seem to find anyone that knows or wants to machine these blocks for me. I will have them taken apart studs...

I bought the 32 gas tank frame kit for this hot rod 30 tudor/ now three door from Dagel's and a stainless 11 gallon tank from tanks. My tank edge just hit the 90 degree elbow gusset on the driverside inside edge. A couple of hard strikes with a sledge hammer before paint and primer of course and...

Does anyone know if there is a Vender or individual that makes a tool somilar to the KR Wilson shock cover removal wrench? I have a plasma cutter a Milling machine and a lathe and can maybe make one trial and error over the new england winter but would buy one if they are available. I have...

Hi I am new to the site but have been a Model A Ford guy for 27 years and a Hot rod guy since I was 16 and I'm now going to be 60. I just found someone looking for a Columbia two speed which I have and will sell him if I can reach him? It said I don't have enough post yet? Any advice?

Re: Are tubes needed on 16” radial tires Hi I actually have bias ply tires on my 30 coupe running tubeless with the chrome napa grommeted stems for a seal and have had no problems with them.

I guess there is no honor or honesty anymore. Ebay shouldn't limit what they sell and here is why.. I ended up buying a Vintage Key machine so I can cut Model A Ford keys by the Original codes thus saving many lock cylinders and handles from going into the junk pile. EBay cancelled several...

Hello Mitch, I am on EBay Daily and have noticed an increase in Model A Titles. I search all kinds of model A parts so I generally see what is new or trending. I don't know if any of these are the ones you lost but might be worth watching? Sorry for your loss hope you find the thief! Todd...

Forever4, I need to buy a machine that will cut by the codes I have three Rumble handle locks A-1098, A-1187, A-1191 I want a machine that will cut these. If you have one please e-mail me some photos and prices of what you have and what it will do. Thank you, u10166, Todd my e-mail is...

I am looking for the K R Wilson Key cutter anyone have one for sale? I am a True Model A man and want to reproduce the keys for everyone at a reasonable cost "NOT" 50.00 each like some. I have two 1930 coupes going at the same time and I am also trying to get the gaskets for the Gordon Smith air...

I am trying to find the gaskets for the Gordon smith compressor set up myself any luck? My e-mail is tfdali@sbcglobal.net Sent from my iPhone using Tapatalk

I am looking for a K. R. Wilson key machine?