Recent content by tweetiebirdcenter

I need front and rear fenders (restorable) for a 1936 Ford Pickup.

I have for sale a complete automatic transmission with converter, bell housing and everything else to mount the transmission. The transmission came out of a 1951 Ford that had 70K miles that became a street rod. Buyer must make arrangements for shipping due to weight of trans.

So I replaced my headlight switch on my 40' coupe and I installed the knob now it is upside down. Instead of an L for lights now I have a 7 which way do I have to turn the knob so it is correct?

Originally, did Ford recommend brake fluid as a lubricant for vacuum wipers?

Wanted: Right hand axle tube for a 1936 Ford Car or a Columbia axle (right side) tube for a 1936 Ford Car. Please respond with a price and availability. Thank You!

I am in need of a Columbia axle housing (Right Side) for a 1936 Ford or a regular axle housing that I can send to Columbia Two Speed parts and have it mated to a Columbia Housing.

I need a muffler for my 40' business coupe. Does anyone manufacture these?

HI Kevin, I did what you told me to do and the gauge did not move but had power to one side. When I bought the car it looked like it had a fresh wiring loom so I assumed that the wire to the sender was ok. I took a long wire and went from the sender to the gauge and it worked. I did not want to...

The gas gauge on my 40 reads full all the time when running or the key is on. I disconnected the wire at the sender in the tank and it still went over to full. I checked the power at the gauge and there is power on one side at the buss bar but not on the other side of the gauge. I grounded the...

Just had my 3sp,od transmission rebuilt. The builder suggested that I adjust the shift rods to make sure it is going into gear. When I shift into 2nd it doesn't seem to go all the way in and periodically jumps out of 2nd. High gear does stay in gear and doesn't jump out but the shift handle on...

Want to buy a rear spring for my 40' standard coupe, original spring with aluminum wrapping if possible!

Thanks to everyone's for their suggestions. I changed to .048 today and what a change for the better. I think this car came with a Stromberg 97 instead of a 94 at least I have heard that from other people. Thanx again!

I have a 1936 engine in my car. I removed the carb to clean it and found that it has .051 jets in the carb. After I installed the carb and adjusted it, it was loading up so I cleaned and gapped the spark plugs. The car idles roughly but is very responsive to accelerate. The tailpipe has black...