Recent content by tubadon40

Could I have "torsional Vibration"? My '30 phaeton runs smooth as silk under power. Then on deceleration it really gives me a foot massage. Up to 25 mph it is almost unnoticeable. Then at 30-35 it's bad but at 40 and up I really don't want to decelerate without disingaging the the clutch. I...

Thanks Tubman I will try to find some 16oz around here. I have hollow punches. besides I can't find how to PM ya. Will find out if I am unsucessful finding the leather. shouldn't be too hard. Shoe or Harness shop maybe.

Question: The pad on my brake piston is GONE. What should I use to replace it? Leather belt of what thickness?

Looks about same size pipe as the Columbia OD needs. I need one.

MSMARON, If the one you have with bowl adapter is the one intended for Lincoln Merc. carbs, you may have to obtain the (scarce) emulsion tube that came in most SW installs as the "fuel line kit no. 30". I have never seen the bowl adapter but believe the emulsion tube may be part of it. They...

I had a Southwind in my '29 sedan. Mounted it to the angled top portion of passenger side floorboard as did not want to drill firewall. Worked great. It does not have to be mounted exactly vertical. Vacuum from WW port on intake. As far as the pickup tube on the carb., just a little hole in top...

YUP 51514bat thats the same setup my friend has. He is not interested in competive showing and it will never haul stuff to invoke its use. But that's it. Is there a mfg's name or anything on yours to ID it's maker? I have a 40 half ton tore down for restore but am not looking for more parts...

Helping my friend restore his 1941 half ton. We are done except we want to keep what appears to be a well made overload get up for the rear. He was told it was a "Moonshine" kit. I should have taken pictures and still can but I will try to explain verbally. It looks like the original rear leaves...

Sounds like Ign. power erroniously wired thru the two terminal original temp guage sender.

Where can I buy a camshaft for a 1953 F100 with 215 cu inline six ohv? I can't seem to find one at some of the ususal MACs C&G ect.

My friend has a 1953 F-100 pickup with stock 215 OHV 6 cyl. engine that has developed a major problem. I have a good 300 engine and attached transmission. Am considering a swap to the later engine. What in your opinion is the best route to take? Will the old bell housing and ****** fit the...

Is the engine using the original Fuel Pump? If user went electric and did not plug where the fuel pump rod rides the camshaft, you will loose oil pressure. Just another thought.

Keep in mind there was a BIG difference in gasoline formula back when those spec's were made and todays mixes. If you try to match those specs I would use the premium at the pump and NO alcohol.

I put a BW overdrive in my model A and it has a 21 tooth driven speedometer gear. I need a 19 tooth for a closer reading speed. (3.78) I used a 1953 Ford unit. Please check your parts stashes. Thanks tubadon40 at aol.com (use @ instead of at)

So what do you do about mating the output to the torque tube?