Recent content by TT

http://www.fifthaveinternetgarage.com/ A site dedicated to what you are trying to do, I revived a lot of help during my conversion to 12v 5 years ago.

yep... but then again, perception is reality. give it a chance, there is a ton of knowledge, and if you need parts, Chris and Ray (site sponsors and Shoeboxford.com owners) have just about everything you will need...

I have one of these and a pair of 22" Smithy's I would be willing to part with, also the right hand side exhaust manifold with a block off plate installed.

Hang in there Sir, it will be worth your effort...

There is a questions and suggestions section on the main page. http://www.fordbarn.com/forum/forumdisplay.php?s=&daysprune=&f=12

My 49 - 51 shop manual lists 75 - 85 ft-lbs. It did change for the later engines.

75 - 85 fl-lbs is listed on the Vanpelt website. http://www.vanpeltsales.com/FH_web/flathead_torquespecs49-53V8.htm

yep, great post... these are the type of post that I don't remember seeing much, if at all on the previous forum, but were urged and more common on the HAMB. Hoping to see a lot more of these TECH posts specific to the Ford engines and cars. I know of several fordbarners who have the...

Use the "IMG Code" link when trying to post the picture on the site, that is what works for me...