Recent content by Trevor

Thanks gents for you assistance. Looks like I have it the right way round. :)

[ It seems that the '31 SW has different door hinges to most other models, but similar to the Victoria. I have 2 questions regarding my front door hinges; 1. The front door hinge at the top of the door is mounted differently to the hinge at the bottom of the door. The top hinge has the...

My hobby is my Canadian built '31 160B Slant Windshield that I am in the process of renovating. It looks as if the cobra long grain roof kit has been replaced with a piece of steel sheet metal. The car has been in the family since '39 and as far as anyone can remember, the roof has been steel...

I have an oil leak behind my camshaft. Is there another gasket besides the half moon paper gasket to seal the back of the camshaft and stop the oil dripping into the flywheel housing?

The way i understand it, is that the springs push the rods away from the cross shaft. I have attached a drawing that I am working from. I will be able to slip the springs on the rear rods from the adjustable eye end, but the front rods, i would need to get the springs over the fixed eye?

How do I get the springs over the eye at the end of the brake rods?

Hi guys, i have a 1931 A. I am battling to get my actuating arm to face 15 degrees forward. I have new drums, new pins, relined shoes. Could it be that I need to build my track up a bit?