Recent content by TraVeler

If i could find lower seat backs and take original seat and frame out i could maybe slide under shelf

This one has the rumble seat

That piece of metal shelf comes out?

How does the shelf come out?

Im 6'3 in a 31 coupe its a tight fit. I can barely get my leg under steering wheel. Can the seat be taken out and a thinner one be put in? How do taller people drive these things?

Ive got a 31 couple with good 6v pos ground alternator. When i first cut on the battery cutoff it shows discharge until i start then it will move to maybe 8 on the ammeter. If i cut the lights on they are really dim and the altermator does not kick on to make em bright. The ammeter stay at 0...

Motor is locked up. I cant get it to hand crank. Or clutch is stuck

I pushed starter button a dozen times and the battery lead wire to starter is hot

Cleaned starter button contact still nothing. Not a click , bump or anything

Okay removed battery switch still nothing. I have 6 volts to starter, ignition switch and ammeter. I have the genesis g3500 hooked up for a trickle charger. When i hit the starter button nothing happens the meter shows no draw but the trickle charger senses a drop and starts charging and is...

Something I thought was strange yesterday that the battery drained with the battery cutoff. i didn't think that was possible. the connections look clean.

here is the picture of the brake part that caught the loose wheel stud/lug nut

Yea the 30 amp breaker is still tripping. The car was off and the breaker tripped twice. I don't think these cars were run very much for the past 10 years. I guess I'll be learning more about the electronics on these things. out of the 3 cars, at least one is running well other than the...

I will check the backing plate as well. The wheel stud definately came loose or someone previously tried to change the tire and the wheel stud spun out but it took a chunk out of one of the brake components. I have a picture but dont have an online image host. I'm just gonna weld em in then...

Do you think the wheel studs could come loose and caused the bang?