Recent content by tommymdot

Found one! Thanks

I am looking for a 1930 - 1931 Model A Ford coupe driver's side latch rod and brackets. Thanks! Found one Thanks

I do not like the roll pins. They are not as substantial as a solid pin. It would have been easier for Henry to use roll pins too, but he built his cars to last. I buy 3/16 X 7/8 solid steel pins and weld a head on one end. I insert the pin in the fork assembly from the top using long neck...

Wanted: 1932 Ford 3 window outside door handles. THanks.

I am looking for an original 1930 - 1931 Model a front bumper center clamp. Condition not critical. Thanks tommymdot@comcast.net

I am looking for a 1925 Model T roadster body. I will consider anything. Thanks for your time. tommymdot@comcast.net

SOLD Late '31 body with indented fire wall. Solid doors, deck lid, and windshield frame All garnish moldings and seat frame. All new top wood New Brookville subframe designed for 1932 Ford chassis with kickup All patch panels installed tommymdot@comcast.net

Offered is a hulk of a 1966 Ford pickup. Clear title straight solid frame decent bed Many other useable parts All offers considered Cannot upload photos. Please E-mail me for photos. Sorry, thanks Tom tommymdot@comcast.net

This is a good running Model B engine mounted on a Model T partial frame. It can be started and run. Included is a radiator (possibly NOS) and 4 cylinder transmission. This engine can be placed in a Model A and later gears put in trans case for more power and better shifting. All offers...

This is a good running Model B engine mounted on a Model T partial frame. It can be started and run. Included is a radiator (possibly NOS) and 4 cylinder transmission. This engine can be placed in a Model A and later gears put in trans case for more power and better shifting. All offers...

Found one!

I need the driver's side spark plug conduit for a 59AB with the crab style 2 bolt distributor. Found One

This is a NOS fender that was improperly stored. Surface rust only. No cracks or holes - straight bead. There is also an area of the flange that appears to be cut away, but I am not familiar enough with the fender to know for sure. (See photo) Shipping extra, pickup free! Don't know how to...

I am looking for a pair of the arms that attach to the rumble lid pivot pins. The counter balance springs attach to these arms. Thanks tommymdot@comcast.net

I am looking for the vertical channel that is right behind the quarter window on the driver's side of a '28, '29 Model A 2 door sedan. Thanks tommymdot@comcast.net