Recent content by tof33

The engine is the 201 ci one More pictures...

Indeed the french version is different. The car's owner couldn't details anymore ... but his widow tell me that this car was in a castle in the south of France - this is an orignal frame. But a Ford French one or a custom body I don't know. About picture I have to take some additionnal ... I know

Indeed as mentionned at the beginning: Ford ANF (B model), upgraded with the US 19cv engine (the 12cv original engine cans be supplied with the car)

I only have the 2 photos in the add ( 3/4 front and rear ). The car is located far from my home ... I could take some picture the next month (which details would be usefull?)

Thanks a lot... I'll keep this mount. Christophe

Hello I've posted an ad for a friend of mine (his widow in reality :( ) about a french B32 station wagon. an original french made woodie 12cv engine upgraded to the 19cv one working order I don't known well such cars and I wonder if she's right about the asked price of 30000Eur. (I know...

Hello I recently bought a '32 cabriolet (need to be restored) and I'm quite newbie with those car. The car is fitted with 2 spare wheel in the front fender. Cabriolet usually have the spare wheel located at the rear. Is it an option ? a custom work ? Thanks Christophe

Yes you are right. So from inner to outer: 1/ custom ring : 52,3 mm (axle housing) x 55 x 54mm (axle housing length) take, check, verify your own measure, depends on you axle condition 2/ inner ring 55x62x38 + 55x62x16 "1 and a half" : you have to cut a 2nd inner brace to reach the 54mm...

Yes the inner ring surface is hardened. It's sold with the bearing. Christophe

Yes my Avatar is my 35 cabriolet. More exactly it's a page of the Kellner catalogue. My car is a French made V8-48 with a Janer custom body (5 places under the hood). Janer was the coachwork for little series by Kellner. I don't know any other same car. Today there's a Buick '34 with the same...

The custom made inner ring is very simple: in diameter : depends your housing surface, but usually the original bearing surface out diameter : the inner diameter of the IKO bearing : 55mm length : the original bearing surface housing length Precision: - you need 2 IKO inner bearing : one...

Hello Recently I bought a Ford 35 and during a rear brake inspection I showed the wheel bearing surface of the axle housings was scored on the under side between 0.02 to 0.11". Usually you have to buy a new inner race and grind the shaft housing : quite hard, expensive and who can do that ?? So...

Hello, A friend of mine is selling a french Ford B ANF Station Wagon. It's an original car restored in the eighties. So an old restoration but the car run well and is in good condition. The original engine WAS a french 12cv 4 cylinder replaced with a 19cv banger. (The original engine should be...