Recent content by Tanglfoot

Chris Horn is your man, he is now making the Balancer as a 2 piece for ease of installation and belt replacement. His no NZ 0211986639. Cheers Ross NZ 021941002

Hay Synchro99. I will call Murray on Monday for details as I believe that his son is involved now. Post reply on Monday Cheers Tanglfoot

Hello all, I am with Synchro 909. I have used Nissan Navara Distributors from around 1990 with good results. They are easy to adapt and parts still available here. Cheers Rosco

I have a 30 Roadster with 3.54 diff and 25% Laycock OD and i love it. My 30 Coup is 3.78 diff and 27% Laycock od and hard to tell the difference. Cheers Rosco.

Thank you John that will help me Cheers Rosco in sunny North Island.

This is for johnneilson. Can you tell me John what shells you use please, I presume they are readily available. Thank you in anticipation. Rosco

Yes Ted has my old email address, however David Mossman and I have bean doing Laycock conversions for some years now. In answer to your first question they do operate on 6 volts ok and if you have a cut out switch on the generator this makes the od drop out of overdrive at idle so no safety...

I trimmed the shoulder on the studs back a bit and fit the drums loose on the studs and let the wheel hub hold the drum in place as in most modern cars rear drum brakes Cheers Rosco

Hello Mike, first of all what oil are you using we in NZ use 75 w 80 GL4. They used to share the oil with the gearbox/ transmission. The solenoid is clicking but it may not be holding the 400 psi needed to stay in gear. First thing I would try is another solenoid if you have one available. you...

I purchased a Fordor that had a new ali radiator and it boiled 6 times on the ride home, first job was to replace it with an A rad no more probs. Cheers Tanglfoot

I installed a modern valve kit with Stainless valves in my B motor 6 years ago and set the gap at 12 thau no noise still going. Cheers, Rosco

Well you know what they say--- The older you get the better you were. cheers Ross in NZ

Hello Tod, yes the Model B 7.1.I received from you last year performs realy well I love it. Cheers Ross in very warm Mangawhai NZ

I have an A motor with a C (Ford Factory counterweighted) crank ground to standard A shell mains and AER B rods--Smoothest motor I have driven.

Only before I putt