Recent content by Tall T

:)Regarding the raising of the tank, you have only about 1/8-3/16" space above it, when the body is mounted and the tank is in the stock position. This is to provide room for the rear frame horn covers which have a grommet installed in them to prevent rubbing between the body and any other metal...

:oI have a '32 Ford Tudor that I'm putting back together. The problem that I can see happening is with the rear side windows. Where are the drain holes for water for the side windows in the Tudor? I know that the windows are supposed to seal themselves to the body (the weatherstrip[?] that the...

Would the velcro have enough strength to hold the door panel in place if the panel was made out of 1/8" luan mahogany plywood that has to have a slight bend in it because it has to conform to the shape of the door which has a slight curve to it?

:rolleyes:Looking for a glass pattern for an unchopped '32 Tudor windshield. The glass place in our town is not capable of cutting a proper piece of glass to fit the frame. Is there any way to obtain this pattern from the frame and do so allowing clearance for the glass setting tape. Also where...