Recent content by strutgka

I am planing of changing my 2140 carb to a newer edelbrock and thus need replacing my oil pump. Since I have a 272 i the garage with oil pump, the easiest way would be to shift it over. Without trying, is this oil pump fitting from 272 to 256..? Thank you..//Karl-Johan

Thank again for responses... I think problem will be solved since I actually have two grilles.. One will be grey an the other one green.:D ..//Karl-Johan

scicala. So the silver/grey colour are more "original" and by that saying, more correct:confused:..?? ..//Karl-Johan

Thanks again för answers and superlatives..! Most likely you had to paint grille in body color, and that it was delivered in gray. So again... think it will be green..:D ..//Karl-Johan

Thanks for answer..! Most likely this has to green or white then. [/IMG]

Hi..! In a market, I found not one but two speaker grilles to my Mercury -54 and these were in very good condition but needs some color. I have sandblasted one of them and are supose to give it som finish. Anyone here who knows what the original color the speaker grille on mercury should be...

dmsffr...! Thank you very much for the information. What you describe, I knew nothing about. As I see it, it should in this case be no problem to mount a B7a advance canister just like you wrote. The one I have today is with a straight arm (see picture) and this ought to be the crux then I...

Hi..! Someone here in the forum who can respond to what the difference between the vacuum advance with part b9af-12370-b and B7a-12370-a is. I have a -57 distributor and it's equipped with a b9af-12370-b, but this seems impossible to get hold of, so a thought popped up if this can be replaced...

Hi... Anyone here hwo knows were to find repair kit b4a8591-a to my Mercury 256 cui water pump? I've searched all over the web with bad result, and i am beginning to give up. I will be pleased with just bearing 8578 since that's the one that's broken. Any tip will be helpfull. Thank...

Shipping to Sweden..? Thanks..//Karl-Johan

Hi..! I am about to give my SunValley -54 new upholstery, but when I removed the old one, I discovered that I'm missing clips like on the pictures. I have searched on the web for clips like this, but I'm about to give up. So... for that reason I hop for answer from member on this forum. Is...

OK..! Thank you for answer, this was what I suspected, otherwise there seems to be some small differences between 54 to 55. ..//Karl-Johan

Hi...! Can anybody tell me if I it is same main bearing seal to a mercury 256 cui as it is to a 272, 292 cui..? :confused: It's the 6A321-ARK http://www.parts123.com/parts123/yb.dll?parta~dyndetail~Z5Z5Z50000051e~Z5Z5Z5AAMMB~P20.00~~~~S3B609ON6G85227158750g~Z5Z5Z5~Z5Z5Z50000051e I'm thinking...