Recent content by steve smith

This is absolutely correct. Cast iron drums mated to turned shoes stop amazingly well and are simple to adjust

Guess that won’t work with my air conditioner😉

Found one, thanks everyone

Removing and installing the mounting bolts use a 1/4" rachet and adapter on the socket to turn it in and out much easier.

Costco brand 14-40 excellent for my Duramax and my A's

Replace the inside gas shut off with a modern 1/4 turn ball valve is all that is needed .they seal excellent and No more smelly gas in the cab

Sold too fast. Lets keep those prices up. These babies are getting scarce!!

I would also recommend Ken Davis Model A air conditioning kit. It changed the way of life in an A

Looing for a used choke rod 28 1/4" for my doodlebug

What is the newest news on which gasket to use on a Snyder 5.5 to 1 Head ?

My mailbox u-turn is also the same with both pitman arms , but the short one requires less turning and has a quicker road response at high speed(about 60mph).

I use a Weller electric soldering iron. Can control the heat easily.

Calif requires a "vin" number. They will accept a frame or engine number upon a physical verification . AAA insurance that has a DMV station is your best friend in Calif.

Hard to hold on to that crowbar while putting on a load at 2000rpm going uphill

Not sure how many "0's" are involved but I have been using for years in my 6 ft rotary mower, my A's steering boxes and I mix 50% corn head with 50% stp for transmissions and diffs. They stock plenty at the local John Deere store. Comes in tubes like caulk, very easy to use. I think it was about...