Recent content by Speedyal

I am selling a fully rebuilt 60hp flathead ford three speed transmission. It was rebuilt and i never used it. I bought it rebuilt and was going to use it but changed direction of project. The trans has shifter tower and shifter and also included is a new clutch disc. I am asking $575.00 or best...

Hello, I had this happen to me . Yes the pin is tapered if you look at it should be able to see one end of pin is bigger diameter then other . Should be able to just use punch and hammer to remove pin , I at least was able too

Okay, You will know you have it engaged when you can free wheel . So with cable pushed in at least on my car if driving down the road you let off gas it will not slow down it will free wheel almost like being in neutral. So if going down the road and engaged by pushing cable in after going into...

Here is a great article I also have this over drive. http://www.santaanitaas.org/wp-content/uploads/2014/08/1C-Borg-Warner-OD-Restorer-Mar-Apr-2005.pdf http://www.ocmafc.com/techarticles/Tom%20Endy's%20Special%20Topics/Borg%20Warner%20Overdrive.pdf

Steve this what I have found on a site that works on the front axles. 28-31 original axle measurements. 50-1/2" Kingpin Center to Center 36-1/2" Spring Perch Center to Center 2-1/4" Spring Perch Boss 1" Factory Drop .8125 dia. Kingpin 2-3/8" Kingpin Boss

Young Blood , Look at this website has ton of information . http://modelabasics.com/home.html

Just a question if you pour a little gas down carb will it run and if it does can you keep it running by trickling gas down carb ? This would tell you if it a fuel problem, because if you are pumping it to stay running it squirts gas every time via the accelerator pump so sounds like fuel...

Hello, I used a guy in Central IA Greg Lane does great job on stainless and other polishing copper and other medals . His number is 319-310-4155, I have pictures of his work on my grill shell and headlight buckets and rings but cant figure out how to upload. from his post information about him...

So the number you have on the tittle A-2421250 comes up as October 4 1929 from the Model A Data base website Modelahouse.com. So as we all know the engine was stamped first at the factory then as it was placed in the frame it was stamped with that number. So if you have a 1930 car it possibly...

Yes it is a nice car, but some of the stuff done can not be fixed without a lot of work , for example gas tank cut up to install radio, this is very nice car and if It was the first car sold in that area and the owner knew this why would you modify it and not restore back to the original way it...

Look at the body tag above the fuel bowl on fire wall might be able to cross reference and find out what you have http://www.mafca.com/downloads/Technical/Body_Numbers.pdf

Also here is some information that might help too https://www.vintagefordforum.com/forum/model-a/technical-reference-chassis/98845-what-year-is-it-~-factory-data-body-styles

Hello, Here is a car I think is like yours add from last year totally restored https://forums.aaca.org/topic/298476-1930-ford-model-a-deluxe-2-window-fordor-blindback-sedan-exceptional/

Sold

Still Have rear end Make a great deal on it