Recent content by Sopwith Camel

would a machine shop be able to ream the bushings?

that would make sense.....not sure if MAC's sells that....maybe Sacramento Ford

Im gonna go ahead and re-order bushings....and cut a chunk of the old shaft, lightly oil it, and insert through bushing to minimize distortion during pressing...may be over kill, but I think that may reduce the chance of distortion. Does anyone make a bushing for the distrib thats a little...

I bought a rebuild kit from MAC's, and started rebuilding the distributor.....pressed out the old bushings, cleaned it up, and pressed in the new bushings. The upper bushing was pressed from the top and went in much easier than the lower, the lower was pressed from the bottom side and had a...

Now thats funny! Unfortunately, map reading...or just finding your own a** on a map is becoming a lost skill. But I'm assuming Nick is Army or former Army...so shouldn't be difficult. Good luck on the GPS thing, and hopefully it doesn't put you in a cornfield like my TomTom tried doing.....mayhem:D

Like many others Im in search of two 18" ford wide five wheels....even one would be a good starting point. Any leads? Or if you have some to sell I would love to find a pair of those beautiful 18 inch, high ground clearance, kelsey hayes, wide 5 beauties.....i think this has become a obsession...

if possible email pics to: hotrodflyer13@yahoo.com

WANTED!! 16x4" and 18" FORD WIDE 5 WHEELS looking for 16x4"(mostly 16x4) or 18'' ford wide 5 wheels. Clips dont have to be there as I have a bag full of them. Im mostly on the HAMB (oldskoolflyer13) but decided to give this a whirl for locating parts. Can email hotrodflyer13@yahoo. com or call...