Recent content by Screwdriver

Looking for a good radiator for a 29 Fordor near Ga or willing to ship

Thank you those articles were very helpful

Do you have a set of front fender brackets for a 29 that you will sell

Trying to fit a Fordor back together that I bought in parts. The gas tank drops down from the inside not like all I find that lifts off from the top. I have figured out the firewall side but can only find two bolts just above the gas gauge that will match up. Does anything bolt on each end...

Those look like the ones I purchased at the swap meet which will not fit

I can’t seem to find the right brackets for my 29 model a. I am supposed to have 29 Fordor fenders. I have brackets from a 30 pickup and I bought a set at a swap meet which are supposed to be from a 29 (something) and neither seem to fit. I am trying to build a Huckster using a 29 Fordor body...

Looking for a usable radiator for a 29. Needs to be near Ga

Looking for a Model A 29 Radiator and Shell also front fender brackets and hood shelf

I have a radiator unknown year, I have a shell that is smooth on top and painted at the bottom. Ok problem the radiator neck comes up flush with the top of the shell. I bought a 30/31 cap and there isn’t enough room between the shell and the neck for the cap to fit. Where am I going wrong...

Checking my parts catalog I see the two gaskets and the two inserts for the rear housing. Do I put anything where the two housings bolt together

I am missing the rear gasket

Thanks. The gasket should be between the cone and transmission. Right

Installing my 31 engine and ran into a question. A cone around the universal joint has two holes, where should they be positioned. Top/bottom. Left/right Thank you