Recent content by RPMREX

Thank you for resizing the picture. Anyone have a pully?

3 brush and fan mounts on the front of the pullys. Its 4 3/4 wide

Im looking for another pully for my generator. It's a ford Q7 generator. The one on it now has a pretty good size chunk busted out of it. Its a dual groove pully. I would be fine with a single groove pully as long as my fan will still clear everything. I tried to upload a picture but it keeps...

Need 2 28 - 31 A bed strips.

I need two 16" wire wheels. I have a bent spoke wire wheel I'm not needing if a trade could be made or I will buy.

I'm in need of one shock. I have the arm. Good shock only please. It's for the rear of my 31 truck

I need a 30-31 rear spring pack. Preferably with useable bushings. Thanks, Rex 574-849-3106

Hi guys, I am looking for a complete rear end. I will be changing to juice brakes so I wouldn't need that stuff, but everything else. I am in Elkhart,IN and don't want to drive too far to get a rear end. Gas is expensive and would soon out weigh the price of a rear end if I have to drive...

What a dreamy car!!

That is Sweet!!!!!!!!!!! GOOD JOB!!!!! Enjoy It!!

Does anyone know where I can get the cowl vent pivot stud and spring, washers, nut ,cotter pin etc as a kit or individually for that matter for my 36 Ford?

I checked fordbolts.com they sell the castle nut and cotter pin but not the cowl vent pivot stud. Does anyone know where I can get the cowl vent pivot stud and spring, washers, nut ,cotter pin etc as a kit or individually for that matter?

Does anyone sell that spring and bolt setup? What do I do about the gasket being to thick? I was assuming that was the problem.

Gary, that does help. Do you have a picture of the other side showing the little spring? Mine doesn't have a littlt spring. It looks like some one put in a solid steel tube.

Yep. I just looked. When i pull the chrome bar toward the dash, it doesn't want to go far enough to let the ratchet bar notch to catch. The spring is hooked up and all seems to be working right but it wont quite go far enough to catch in the notch and the end of the slide. When I was just...