Recent content by rmengines

This is a 1932 Ford Frame. The rails are stamped steel and have never been completely assembled. The front axle is an OEM Ford heavy 1932 that was dropped 4 inches many years ago. It has 1937 round spindles with new king pins. The front spring and all mounting hardware is Speedway. The wishbone...

This is a chrome rear bumper for a 1980 to 1986 Ford F100 F150 or F250 with the Styleside bed or a 1980 or 1986 Bronco. It is in great condition, it is straight with no dents or pitting in the chrome. It is the nicest used bumper you will find. $185.00 260 438-1724

Wanted 1979 Ford Truck Bronco Front Grille Surround. Must be OEM Ford in excellent condition with no dents or scratches. 260 438-1724

bump

bump

bump

bump

This is a Nice 1937 Ford Drivers Side Hood Side Panel With Trim. Needs some minor work at the rear mounting bolt. It was blasted and primed. $135.00 260 438-1724

1936 Ford hood top with new Bob Drake hinge. Nice hood with surface pitting. Straight with no serious damage. $250.00 260 438-1724

This is a very nice set of 3 1933 1934 Ford 17" wire wheels. They were blasted to bare metal and primed. Each wheel was bolted to a hub and turned to be sure they were straight. These old wheels all have some minor pitting but are nice looking wheels. $400.00 260 438-1663

This is a very nice cream colored set of 1935 Ford 16" wire wheels. They are actually more cream colored than they appear in the pictures. They were blasted to bare metal, primed and painted. Each wheel was bolted to a hub and turned to be sure they were straight. These old wheels all have some...

This is a very nice set of 1935 Ford 16" wire wheels. They were blasted to bare metal, primed and painted. They were painted with metallic silver wheel paint. Each wheel was bolted to a hub and turned to be sure they were straight. These old wheels all have some minor pitting but are nice...

This is a set of 1935 Ford 16" wire wheels. They were blasted to bare metal and primed. Each wheel was bolted to a hub and turned to be sure they were straight. I am selling these wheels as rat rod wheels because they have surface pitting. They are good straight solid useable wheels. $400.00 Set...

This is a very nice set of 1935 Ford 16" wire wheels. They were blasted to bare metal, primed and painted. Each wheel was bolted to a hub and turned to be sure they were straight. These old wheels all have some minor pitting but are nice looking wheels. The hub cap and beauty ring does not come...

This is a 347 CI small block Ford stroker engine kit. This engine was ran for a short period of time before it was disassembled and the new block reconditioned. It comes with a pair of Flotec 200 cylinder heads, Scat cast crankshaft, Probe .030 over forged pistons mounted on H beam rods, Lunati...