Recent content by Richardtx

Thanks 19fourty, v8 coopman has the correct one.

I lost my download for the techno source for 32 to 53 ford flathead. Does any have one that i can download. Thanks

The numbers are clear and match the title.

Not on crosmember. On frame rail where the rivets attach to crosmember.

Found the serial number. It was way up front on top of front crossmember. It was right next to the two rivets along the very edge of the frame rail. Thanks to all for help.

Thanks for all your help. Will look further to front.

Looking for serial # location. Was told it was on frame next to steering box. I cleaned the frame about 8" and no sign of numbers. Is there another place to look for numbers? Thanks in advance.

How do i get Bubbas videos?

The completely flat starter plate is used on Mercurys with automatic is to avoid the studs on the converter from rubbing on the starter plate. The same thing applys when installing a C-4 behind a flathead.

It has been my experience with putting a C-4 automatic behind a flathead you need to use a "flat" starter plate to avoid the studs that pass through the flexplate from rubbing on the starter plate. I think that's why they were used on Mercurys with automatics.

In need of a primary metering block for a Holley 4bbl carb. The Holley is a 390 cfm, list number 8007. The part number for the metering block is 7204 that is stamped on the top of the metering block. Thanks, Richard

When installing the switch through the firewall and under the gas pedal do you cut the carpet or not? Is there a dimension between the switch and the pedal?

Sent a reply via Private Message

Looking for Holley 390 cfm carb. Part #8007. One that can be rebuilt. Thanks

Sorry for lack of information. It is a 50 Ford 2 door sedan. It is the front drivers side window.