Recent content by ricconhan

Just take sticky notes and apply to the parts with a note to not sell for less than .....

Looking for others in the area to get together with and tell lies and stuff. There are not many Model A's around the Wayne, NE area and I'd love to find my neighbors.

I was told that my 30 CCPU has a commercial shell and radiator

Here's a picture of mine.

[/attach][/attach][/attach][/attach][/attach][/attach]

I just got a call from John Kohnke, this would be Herm's son who learned from the best. He's back in the shop and looking for work, rebuilding and improving your Model A engine.He's finishing up some of the jobs Herm's untimely departure left unfinished and looking forward to picking up where...

Email Leonard he rebuilt my speedometer head, resealed it, new glass, new bezel, and painted it. Works great. Mine stopped and broke the cable also, no jumping, no noise, was working fine and just stopped. Sent it to Leonard, fast repair and return. jrnichols642@yahoo.com Leonard...

Tonight I went down to the shop and loosened the set screw on the distributor and raised it a whisker then went for a drive, it may have helped a little but she still has a little rattle at freewheeling speed, is this typical for the A's or where do I go from here. You talk about a two piece...

Synchro909, are you saying that your's does this also?

I've got what's hard to describe, I'll call it knock/rattle/tapping at freewheeling speed, when accelerating or deceleration it's quiet, but at freewheeling speed it's there, I've tried changing the spark advance, adjusted GAV, just had the pan off and checked and adjusted the bearing...

Oldforder, I've been trying to contact you the last few weeks. I'm just up the street in Wayne, NE

Oldforder, I also have shyed away from cars out of state for same reason. Oldforder, please check your private messages. I sent you a couple, I just live north of you about 70 miles.

Look similar to this? The pin is tapered, larger on one end than the other, I would suggest a brass hammer or brass drift.

Thanks a million guys, just what you said, bottom of the frame there were 2 tabs hidden behind the frame and upholstery, had to make a small cut in the upholstery to allow them to pivot out, although mine of course didn't have the D nuts, the holes were there and we didn't have the correct...

Sounds like a job for one of my grandson's with gramp's supervising, they're a lot more limber than this o'l guy. Thanks for the help.