Had the same thing and found restricted fuel flow. The shut off valve in the tank had some crap in it. Took it off and flushed it all out and been fine every since
Having gone through a couple of shut off valves I ended the situation with an inline ball **** valve from Lowe's and after 4 years it has been flawless.
I would have to vote its a 312 from looking at all the signs and numbers. You could remove the trans and bell housing and look on the crank shaft flange and if it has a round dot raised up on the flange its a 312.
Having raced with methanol fuels for many years and seeing what it can do to fuel systems It hard to believe we have this in our fuels for every day use. When normal gas started drying up and they all went to the ethanol I started adding a half cup of oil to my tank when filling up. To date I...
Buying off the INTERNET no matter or what it is you ask questions tread lightly try to get references and if possible inspect the items your self and if a hi dollar item have it inspected prior to money changing hands. Above all take all safe guards.
I agree with Franks here. A fresh Y block or fresh 302 have about the same durability so it's almost a bolt in if you decide to do it. Ther is more than enough room to do the swap and if you haven't swaped the generator for an alternator this is another change I would do . Either way its doable...
We had a couple of rides in the movie 'HOPE" by Goldie Hawn and had a good time and got paid very well in the process. All the rented cars were kept in a compound area and only one driver did all the setup where they wanted the parked cars to be located. Cars driven were done by the actors who...
Ship all the water you got to us in Texas we need it bad. Damn your wet and we are burning up here and have thousands of acres on fire now. Damn the luck!
Hard to believe there is that much difference in fuel cost. Right now our gas here is $3.31 a gallon and under contract I pay $1.90 for propane. A few of the stations are still at $3.51 a gallon on gas but that about as high as I have seen in lately.
Costly for the 6 correct bolts?? Any idea what it would cost if the Pressure plate came loose?? Thats a hand gernade if it ever sheared off cheap *** bolts.