Recent content by Ratchet

I'm looking for body repair panels for 1926-27 Model T Tudor: Left and right cab corner patch panels Left and right hood shelves Rear Center body panel or part of Shipping address is in Niagara Falls New York Thanks James

WTB 1926-27 Tudor/Sedan or Fordor rear fender Hi, I am looking for both rear fenders for 1926-27 Model T Tudor touring or sedan. Thanks James

Good to know, I had always heard from my grand father that they sometimes had to tow a car that just had the engine rebuilt. Thanks James

I took the oil pan off today and I was surprised to find there was no oil dippers on the connecting rods is this normal? Other items I found that piece of a broken piston ring lying in the oil pan, so I removed the pistons and found to different styles of pistons one piston has the 3 rings at...

Well as it turns out the valves in my 1926 have been in the past, all 4 exhaust valves have oversized stems and are one piece valves unlike the intake valves are two piece. Is there anyway to increase the oil for the exhaust valves to reduce valve stem/ guide wear?

Bruce Compton fixed me up with a very Stromberg RF. Thanks Bruce

Looking to buy a NOS Stipe 280 or 290 camshaft for my 1926 Model T. Please PM. Thanks James

Well my Model T is going to get some TLC most of the parts needed should be here tomorrow except for a Stipe 280 cam which no one has at the moment. The wiring in my vehicle needs to be replaced the insulation is brittle so I don't want to touch it I afraid insulation will break and fall off. I...

Another parts vender that's awesome thanks guys. James

Thank you!

Thank you for the information I will have a look at Langs web site.

Thanks Will I was hoping somebody had a work around! James

Thanks for the information Steve, I will have to dig into this bearing issue a little more I don't want to get into a dangerous situation. Regards James

Hi, I have a 1926 "T" with badly worn valves, guides and exhaust seats and I am wondering if anybody has recommendation for replacement valve guides, valves and seats? Are model A two piece guides an option? Thanks James

Well the "T" is running but not well, so I did a compression test found cylinders 1,2 & 4 compression below 15psi so I removed the intake/ exhaust manifold and did a cylinder leak down test which revealed leaking exhaust valves. I remove the cylinder head and found badly worn guides, valves and...