Recent content by pistonburner

  1. P

    V-8 Fords on Film

    thunder Road
  2. P

    302 crankshaft balancer

    it is external 28 ounce balancer 1965 to 1980 should should work
  3. P

    engine cutting out

    no fuel filter
  4. P

    engine cutting out

    well I changed the carb for a new one and cleaned the other one...no change
  5. P

    engine cutting out

    Hey gys i have a 41 flattie that cuts out under just when it starts to pull good, when it is sitting you grab the throttel and almost but not quite half way it starts cutting out. I have replaced the coil even put a divorced coil on it changed the pionts changed the plugs checked all wiring from...
  6. P

    cutting out

    I have a 41 engine it is a stock engine and when you accelerate just when the engine starts pulling good it cuts out . I have changed the coil even put a new divorced coil on it. I have changed the inner caps on the distributor changed the wires,plugs,points checked all connections. I even put a...
  7. P

    What I Did on My Lunch Hour

    why is the shifter on the right side on Lincoln did they do that for room er what
  8. P

    emergency brake cable

    thanks for the info cable is on it's way from scaceys
  9. P

    emergency brake cable

    Hey guys I need a emergency brake cable for my 37 ford pick up i have checked all the stores they say that they don't have any . any ideas thanks
  10. P

    engine balance

    i balance a lot of engines, trust you guy it may sound funny but it will work if you are racing it that will be a big help or you can find a wirst pin that matches the weight let him do his thing
  11. P

    Playing with video's, Reliability run NEW VIDEO ADDED #2

    Re: Playing with video's, Reliability run i liked yer ride very much the engine sounds good i bet the person in the minny van got a thrill thanks for the ride
  12. P

    Pennies in block

    yep an old hotrodders trick what year are the pennies
  13. P

    radiator

    If the other rads look good don't scrap them someone may need them NEVER THROW ANYTHING V8 FORD AWAY
  14. P

    flat head rebuilder

    If I understand your question right 1936 was the first year for inserts the block has lb on the bell housing LB stands for large bearing if yer engine is a 37 or 38 it will have insert bearings. The rod bearing will be full floaters, as far as the
  15. P

    coil and plugs

    Where is a good place to get coils for a 41 v8 I have a good one on it but would like to have one to carry with me also I have autolite 216 spark plugs in it they seem to be working well dose anyone have any different choice or better choice of plugs
Back
Top