Recent content by Pete from OZ

Hi guys, I have read up on previous posts Regarding Fitting Flywheel Housing to Motor. - I have a B Pressurised motor which was leaking at the rear Camshaft. Question -Is it best to fit the supplied Thin Gasket and use some Permatex. Or - Just use some RTV Sealant around the Camshaft Hole...

Re: Sold my ‘35 to a person in Aistraila Hi Fellas, I am the guy in Australia that was buying Tony,s car. Unfortunately after phone conversations, messages with Tony, and a Reference from a guy we recently just purchased another car from in the USA, the deal is unfortunately not going to...

Katy, This is the bracket I have. Known as the Hood Tamer.

I just did mine, I removed the two support rods at the top of the radiator, loosened the top radiator hose at the head, and just moved the top forward towards the headlight bar. Bonnet will come loose, but I have a bracket that holds both sides up at once. Removed the water pump with fan...

Is there a Gasket used between the Housing and Head, Or do you just use a Sealant. Thanks

Vern Tardell have them

Hi rich b . I recently did this to my 3 window. It sure is tough to put in. I tried the soap first, no luck. I then tried WD40 or Inox and kept spraying under the rubber as it was going into the channel. I had my good wife pushing the rubber while I was spraying and pulling ,making sure it was...

Hi JWL I have a Fluidampr on my Newly built 8BA. Have you had much to do with these Balancers. They are a little costly . Pete from OZ

Hi Fellas, Update on Oil Leak from front Seal I stayed with the New Style Seal and followed the Video posted by JSeery, and it worked. No leaks. Thank you. Pete from OZ

Hi rich b Mine has a small screw at the top which screws into the door top. The flexible channel has the same small screws. I also pulled the original ones out which did have the small screw at the top. My coupe is a January build. Pete from OZ

Hi JSeery, Thanks for the comment. I spent a lot of time with the fit up before I painted anything. The Fenders and Grill required lots of work. It has taken just over 2 years now, with just weekend work. It is getting very close to finish. Pete from OZ

Hi Fellas. Fitted up front Sheetmetal. I went with the suggestion from BRIAN. Inner Fenders, Grille then Hood. Fitted up real Good. Then loosely fitted Fender brackets and installed Fenders.

Thankyou to all for all your suggestions. Also what a great video that JSerry added. I have decided to drop the Oil Pan again this coming weekend and take another look at things with all the information provided. My 35 3 window is getting real close to drive now. Pictures soon. Many Thanks to...

Thanks JWL, If I leave as is will the oil leak become worse or just be a drip . It seems to only start leaking after the engine has been stopped for 10 minutes. Pete from OZ