Recent content by Paul in Colorado

Yes, the door is open. I was able to use a screwdriver to pry the latch from inside. I believe all the screws are accounted for. I am hesitant to pry too hard. It is also hard to get anything between the door panel and the frame lip. Paul

I have removed all the screws from the window frame, but it still will not budge. How do I get it out? Paul

The driver's door latch on my 1930 Briggs Town Sedan has failed, and neither the inside or outside handle will open it, even in the unlocked position. I have managed to get it open, and have removed the outside handle and the screws on the edge of the door. The window molding does not want to...

The Restorer has a new editor. How about helping him with some GOOD articles?

Does anyone use a Tundra Fire Extinguisher?

I believe the Allstate (Sears) carb is a Marvel-Schebler.

How about propylene glycol (Sierra, Prestone low tox)? It is also used as a food preservative.

You can do the same thing with a small transistor AM radio. Paul

I use a Harbor Freight magnet, #67156, in the channel at the rear of the hood, against one of the bolt heads. I wrap it in rubber tape to protect the edges of the hood. Paul

John, We had a wonderful time, and enjoyed meeting all of you for breakfast and at Gilmore. The Model A Museum is fantastic, and the gathering was very enjoyable. The engine had about 3000 miles on it, 1000 after installation and 2060 on the trip. It will be a while before I know what the...

We visited the Hudson museum at Shipshewana on Thursday and saw many interesting Hudsons. The museum has several more in the lobby at Gilmore. From there we drove to my sister's in Hastings. Fri day morning we drove to Gilmore and toured the main museums. We decided to tour the Model A...

We spent the day in Auburn today touring the Auburn Cord Duesenberg museum complex - eight hours of fascinating machinery! My legs are tired! We are still in Auburn tonight, and will drive to the Hudson museum at Shipshewana in the morning. It is only about an hour's drive. From there we...

We appreciate your suggestion, and it is already on our agenda. Tonight (Tuesday) we are in Auburn, IN and will tour the Auburn Cord Duesenberg Museum tomorrow. We will stay in Auburn again tomorrow night, and will drive to the Hudson Museum in Shipshewana Thursday morning and get there when...

I finally have internet access to give an update. Our trip is going well, with a few glitches. On Sunday in Missouri we stopped for gas and the car would not restart. Troubleshooting identified the problem as a bad coil. We installed a spare we brought, and it has worked fine since...

If any Ford Barners want to get in touch with us in Hastings or at Gilmore, our cell phone number is 719-406-0532. Paul