Recent content by pangrenade

I have a 1916 Maxwell touring body I would like to trade for a '23-25 or '26-27 roadster or RPU body. This touring is in amazing shape, the wood is super solid and original. Sheetmetal is the best you'll find with only a small spot of rust. This would make a great brass era project. The pics...

These are a NOS Ford set of .020 rod bearings. part # 92A-6211. There for a .020 crank and STD. rods. This set does all 8 rods. $70 includes shipping in the U.S. Thanks!

Im selling a 8ba for a friend, it came out of his '50 coupe for a late drivetrain swap. This motor ran great, didnt smoke or make any noise. It's complete except for the carb. It may be a '52 or '53 because you can tell it was blue and was painted gold at one time for the '50. Even the generator...

Got any pics? Some inside ones too. Thanks

I've got a rebuilt, ready to run 1935 Harley VLD 74" flathead engine. It's totally rebuilt, .020 pistons, all new shafts, bearings, cages and races. Correct VLD high compression heads, M51 UL carb, generator and new ignition. Belly #'s match and VIN is original, never messed with. I don't have a...

You will have to mill down the T axle 1/8" on the top and bottom to reduce it the 1/4" diffrence. Also the angle on the A wishbone ends is wrong, you need to cut them loose at the trans mount casting and correct the angle to basically straight and reweld it, unless your splitting them of course...

Sold!

turtle deck quarters and the lower inner brace. The deck sides are in good shape, very little rust through at the bottoms, and the brace is straight, just needs cleaned up and painted. Dont want to ship these, prefer local pickup. $200 for the sides and $30 for the brace. Thanks.

I am selling some parts for a 1925 coupe. All the fenders, spare tire rack, side aprons, trunk lid and a wheel that was on the spare rack. The fenders have some old weld repairs, and one of the rears has some rust out. They are very restorable, and the rust through on the one is on the bottom...

Might be going on ebay soon, still entertaining offers. Thanks!

Btt

Selling my modified roadster, this is a new build. Body is based on a 28-29 cowl, the rest is hand built. Driveline is from a '31 roadster and runs great. The frame is custom built 2x3 with a model A rear crossmember and a '32 front crossmember, superbell I beam axle with A spindles and a posies...

Sold!

Sold!

Sold